Panasonic SC-HC49 User Manual
10
RQT9883
[SC-HC49DB]
Listening to DAB+
Preparation
≥ Make sure that the DAB antenna is connected. (
≥ Make sure that the DAB antenna is connected. (
l 5)
≥ Turn the unit on.
To listen to DAB+ broadcasts, the available stations
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO
SCAN” and memorise the stations that are available
in your region if the memory is empty.
in your region if the memory is empty.
Press [CD/RADIO] repeatedly to select “DAB+”.
≥ “SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception
(
(
l 11, “To verify or improve the signal reception quality”) and
then re-scan DAB+ stations.
∫ To re-scan DAB+ stations
When new stations are added or when the antenna
has been moved, reperform the auto scan.
has been moved, reperform the auto scan.
1
Press [PLAY MENU] to select “AUTOSCAN” and
then press [OK].
then press [OK].
2
While “START ?” is flashing,
Press [OK].
Press [OK].
Preparation*
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
3 Press [
3, 4] to select “STATION” and then press
[OK].
1
Press [CD/RADIO] repeatedly to select “DAB+”.
2
Press [
:/6] or [5/9] to select the
station.
You can preset up to 20 DAB+ stations.
Preparation
Press [CD/RADIO] repeatedly to select “DAB+”.
Press [CD/RADIO] repeatedly to select “DAB+”.
1
While listening to a DAB+ broadcast
Press [OK].
Press [OK].
2
Press [
3, 4] to select the desired preset channel
number and then press [OK].
≥ You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
≥ The station occupying a channel is erased if another station
is preset in that channel.
∫ Listening to preset DAB+ stations
Preparation*
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
1 Press [CD/RADIO] repeatedly to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
3 Press [
3, 4] to select “PRESET” and then press
[OK].
1
Press [CD/RADIO] repeatedly to select “DAB+”.
2
Press [
:/6] or [5/9] to select the
station.
≥ To select by preset, make sure that stations have already
been preset manually.
Some DAB+ stations provide a secondary service as
well as the primary service. If the station you are
listening to is providing secondary service, “
well as the primary service. If the station you are
listening to is providing secondary service, “
” will be
displayed.
1
While “
” is displayed.
Press [PLAY MENU] repeatedly to select “DAB
SECONDARY”.
2
Press [
3, 4] to select the secondary service and
press [OK].
≥ The setting will go back to primary service when changes are
made (e.g. the station is changed).
*
The “TUNEMODE” setting is memorised until it is changed.
Memorising stations
≥ When updating the memory with the auto scan, preset
stations will be erased. Preset them again (
l right).
Listening to the memorised stations
Presetting DAB+ stations
≥ To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(
(
l left).
Listening to the secondary service
SC-HC49DBGN&GN&GS~RQT9883-B.book 10 ページ ２０１４年２月２１日 金曜日 午前９時２６分