Panasonic SC-HC38DB User Manual

RQT9743

≥ Sliding door is not in correct position. Turn the unit off and on 

again. If this display appears again, consult the dealer.

≥ The iPod/iPhone/iPad is drawing too much power. Disconnect the 

iPod/iPhone/iPad and turn the unit off and on again.

≥ The USB device is drawing too much power. Switch to “CD” 

mode, remove the USB and turn the unit off.

≥ The iPod/iPhone/iPad device is not inserted correctly. Read the 

instructions and try again (l 6).

≥ The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/

iPhone/iPad and turn it on before connecting.

≥ The USB device is not inserted. Check the connection.

≥ Insert the disc to be played (

l 6).

[SC-HC38DB]

≥ There are no preset DAB/DAB+ stations to select. Preset some 

channels. (l 9)

≥ A CD that is not in CD-DA or MP3 format is inserted. It cannot be 

played.

≥ If there are more than 255 albums or folders (audio and 

non-audio), some of the MP3 files in these albums may not be 
read and played. Transfer these music albums to another USB. 
Alternatively, reformat the USB device and save these music 
albums prior to saving the other non-audio folders.

[SC-HC38DB]

≥ This station cannot be received. Check your antenna (

l 5).

≥ You have connected an iPod/iPhone/iPad that cannot be played 

(l 16).

≥ If the iPod/iPhone/iPad is compatible, turn it on and connect it 

correctly.

≥ The unit is checking the CD information. After this display has 

disappeared, start operating.

“REMOTE ” (“  ” stands for a number.)

≥ The remote control and this unit are using different codes. Change 

the code on the remote control.
– When “REMOTE 1” is displayed, press and hold [OK] and [

] 

for more than 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK] and [CD/

RADIO] for more than 4 seconds.

[SC-HC38DB]

≥ Stations are not receivable. Check your antenna and try Auto 

scanning (l 9).

If “SCAN FAILED” is still displayed find the best signal reception 
with the “MANUAL SCAN” tuning function. (l 10)

∫ Frequency band used

≥ This unit uses the 2.4 GHz frequency band.

∫ Certification of this device

≥ This system conforms to frequency restrictions and 

has received certification based on frequency laws. 
Thus, a wireless permit is not necessary.

≥ The actions below are punishable by law in some 

countries:
– Taking apart or modifying the unit.
– Removing specification indications.

∫ Restrictions of use

≥ Wireless transmission and/or usage with all 

Bluetooth

®

 equipped devices is not guaranteed.

≥ All devices must conform to standards set by 

Bluetooth SIG, Inc.

≥ Depending on the specifications and settings of a 

device, it can fail to connect or some operations can 
be different.

≥ This system supports Bluetooth

®

 security features. 

But depending on the operating environment and/or 
settings, this security is possibly not sufficient. 
Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

®

 

device.

∫ Range of use

≥ Use this device at a maximum range of 10 m. The 

range can decrease depending on the environment, 
obstacles or interference.

∫ Interference from other devices

≥ This unit may not function properly and troubles such 

as noise and sound jumps may arise due to radio 
wave interference if this unit is located too close to 
other Bluetooth

®

 devices or the devices that use the 

2.4 GHz band.

≥ This unit may not function properly if radio waves 

from a nearby broadcasting station, etc. is too 
strong.

∫ Intended usage

≥ This unit is for normal, general use only.
≥ Do not use this system near an equipment or in an 

environment that is sensitive to radio frequency 
interference (example: airports, hospitals, 
laboratories, etc).

SC-HC38_DBEB_DBGN_GS~RQT9743-B.book  15 ページ  ２０１３年１月２１日　月曜日　午後１時６分