Pioneer VSX-1022-K User Manual

This diagram shows connections of a TV (with HDMI input) 

and DVD player (or other playback component with no HDMI 

output) to the receiver.

•

The following connection/setting is required to listen to the 

sound of the TV over this receiver.

-

If the TV does not support the HDMI Audio Return 

Channel function, connect the receiver and TV with audio 

cables (as shown).

-

If the TV supports the HDMI Audio Return Channel 

function, the sound of the TV can be input to the receiver 

via the HDMI terminal, so there is no need to connect an 

audio cable. In this case, set ARC at HDMI Setup to ON 

(see 

HDMI Setup on page 52

).

•

In order to listen to the audio from the TV that is connected 

to this receiver using a analog audio cables, set-up for 

analog audio input is required (see 

The Input Assign menu 

on page 49

).

•

Only one component can be connected to both the optical 

input terminal and coaxial input terminal. If connecting 

other devices, please use a different method to connect the 

audio.

In order to listen to the audio from the source component 

that is connected to this receiver using an optical cable or 

a coaxial cable, first, switch to the DVD (DVD player) or 
SAT/CBL

 (set-top box), then use 

 and 

 to choose the audio signal O1 (OPTICAL1) or C1 

(COAXIAL1) (see 

Selecting the audio input signal on 

page 25

).

DVD player

Set-top box

If the TV does not 

support the HDMI 

Audio Return Channel 

function, this 

connection is required 

to listen to the TV 

sound over the 

receiver.

HDMI/DVI-compatible TV