Pioneer VSX-1022-K User Manual

•

If you want to switch the input source, you’ll have to switch 

functions on both the receiver and your display unit.

•

Since the sound is muted on the display when using the 

HDMI connection, you must adjust the volume on the 

display every time you switch input sources.

Use component video cables to connect the video output of 

your HDMI-equipped component to the receiver’s component 

video input. The receiver can then convert the analog 

component video signal to a digital HDMI signal for 

transmission to the display. For this configuration, use the 

most convenient connection (digital is recommended) for 

sending audio to the receiver. See the operating instructions 

for more on audio connections.

•

The picture quality will change slightly during conversion.

“Made for iPod,” “Made for iPhone” and “Made for iPad” mean 

that an electronic accessory has been designed to connect 

specifically to iPod, iPhone, or iPad, respectively, and has 

been certified by the developer to meet Apple performance 

standards. Apple is not responsible for the operation of this 

device or its compliance with safety and regulatory standards. 

Please note that the use of this accessory with iPod, iPhone, 

or iPad may affect wireless performance.

Josh Coalson
Redistribution and use in source and binary forms, with or 

without modification, are permitted provided that the 

following conditions are met:

•

Redistributions of source code must retain the above 

copyright notice, this list of conditions and the following 

disclaimer.

•

Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions and the following 

disclaimer in the documentation and/or other materials 

provided with the distribution.

•

Neither the name of the Xiph.org Foundation nor the 

names of its contributors may be used to endorse or 

promote products derived from this software without 

specific prior written permission.