Panasonic 377 User Manual

RQT8043

RQTV0200

LANG - 5

LANG - 4

FRANÇAIS

DANSK

ENGLISH

To activate the timer

Press and hold [–

˚PLAY/REC] to turn on your desired

timer.

˚ PLAY

no display (off)

˚ REC

Press [

y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

Action

change the
settings

Repeat steps 1 to 4 and 6 (

see left and

above).

change the
source or
volume

1) Press and hold [

–

˚PLAY/REC] to clear the

timer indicator from the display.

2) Make changes to the source or volume.
3) Perform steps 5 to 6 (

see above).

check the
settings

Press [CLOCK/TIMER] repeatedly to select

˚PLAY or ˚REC.

cancel

Press and hold [

–

˚PLAY/REC] to clear the

timer indicators from the display.

If you use the unit after the timers are set
After use, check that the correct tape/disc are loaded
before turning the unit off.

Note:

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

•  The timer comes on at the set time every day if the timer is on.
•  The unit must be in the standby mode for the timer to function.
•  If you turn the unit off and on again while a timer is functioning,

the fi nish time setting will not be activated.

• Regardless of the channel selection during timer setting, the

XM satellite radio always comes on with the previously selected
channel.

• If MUSIC PORT is selected as the source when the timer comes

on, the system turns on and engages MUSIC PORT as the
source. If you wish to play back or record from the portable audio
equipment, just activate the equipment’s play mode and increase
the volume. (See the portable audio equipment’s instruction
manual.)

Using the sleep timer

This function enables you to turn off the unit automatically
after the set time.

Press [SLEEP] to select your desired time.

SLEEP 30

SLEEP 60

SLEEP 90

SLEEP OFF

SLEEP 120

Sleep timer indicator

To cancel
Press [SLEEP] to select “SLEEP OFF”.

Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.

Note:

• The play and sleep timer or the record and sleep timer can be

used together.

• The sleep timer always has priority. Be sure not to overlap timer

settings.

• The sleep timer turns off when you perform the record function.

Setting the clock

This is a 12-hour clock.

Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:

CLOCK

˚ PLAY

Original display

˚ REC

(

Within 8 seconds or so

)

Press [

4, REW/ ] or [¢, / FF ] to set the time.

Press [CLOCK/TIMER] to finish setting the time.

Displaying the clock
Press [CLOCK/TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or the external
equipment (record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.

Timer

Action

Play timer

Prepare the music source you want to listen to;
cassette, disc number (1~5), radio or music port
source, and set the volume.

Record
timer

Check the cassette’s erasure prevention tabs
(

page 10), insert the cassette and tune to the

radio station (

page 11~13), select the music port

source (

page 15) or iPod (

page 16).

Press [CLOCK/TIMER] to select the timer function
Each time you press the button:

CLOCK

˚ PLAY

Original display

˚ REC

˚PLAY : to set the play timer

˚REC : to set the record timer
(Proceed to the next step

within 8 seconds

)

Press [

4, REW/ ] or [¢, / FF ] to set the

starting time.

Play timer indicator

Start time

Record timer indicator

Press [CLOCK/TIMER] to confirm.

Repeat steps 2 to 3 to set the finishing time.

Finish time

Timer

RQTV0200-P_1EN.indd 14

2/16/07 10:11:02 AM