Panasonic RX-ES22 User Manual

Page of 40
38
RQT6279
Troubleshooting
Before requesting service, make the below checks. If you can’t fix the unit as described below, or if something not listed here occurs, refer to the
enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers (e.g. 
6
)
Common problems
CD
Cassette deck
Radio
Remote control
“E” is displayed.
“U01” is displayed.
“U02” is displayed.
CD won’t play or CD display is incorrect.
Certain sections are not played properly.
Recording is not possible.
Poor sound quality.
A lot of noise or difficult to tune.
The remote control doesn’t work.
The unit can’t be turned on from the
remote control.
Indicates incorrect operation. Read the instructions.
Replace the batteries or use household AC power. 
6
Power batteries haven’t been inserted. Insert them or use household AC power. (“U02” ap-
pears only if you have inserted memory batteries.) 
6
Place the CD label facing up. 
à
Wait for an hour for condensation to dry and try again.
Clean the CD. 
à
Replace the CD if it is scratched, warped, or nonstandard.
If the cassette’s tabs have removed, cover the holes with adhesive tape. 
ê
Clean the heads. 
Ç
Interference may be caused by other equipment or the use of its remote control. Turn the
other equipment off or separate this unit from them.
Check the batteries are inserted correctly. 
Ä
Replace the batteries if they are worn. 
Ä
Turn the unit on from the main unit if you are using batteries to power the unit. 
6
,
Ä
Technical Specifications
Radio
Frequency range
FM
87.50
 
–108.00 MHz (50 kHz steps)
AM
522
 
–1629 kHz (9 kHz steps)
520–1630 kHz (10 kHz steps)
CD player
Sampling frequency
44.1 kHz
Decoding
16 bit linear
Beam source
Semiconductor laser (wavelength 780 nm)
No. of channels
2 channel, stereo
Wow and flutter
Below measurable limit
D/A converter
MASH (1 bit DAC)
Tape recorder
Track system
4 track, 2 channel, stereo
Monitor system
Variable sound monitor
Recording system
AC bias
Erasing system
Multi Pole magnet
Frequency range
Normal position
50
 
–14000 Hz
General
Speakers
(RX-ES27) 8 cm 5.4
Ω
 x 2
(RX-ES22) 8 cm 2.7
Ω
 x 2
Jacks
Output
PHONES: 3.5 mm stereo (16
 
–32
Ω
)
Power output
(RX-ES27) 140W (PMPO)
 (RX-ES22) 70W (PMPO)
Power requirement
AC
110V-127V / 220V-240V, 50/60 Hz
Power consumption: (RX-ES27) 33W
(RX-ES22) 20W
Battery
12 V [Eight R20/LR20 (D, UM-1) batteries]
Do not use rechargeable type batteries.
Memory back-up for computer/clock
6 V [Four R6/LR6 (AA, UM-3) batteries]
Do not use rechargeable type batteries.
Dimensions (WxHxD)
529 x 144 x 276 mm
Mass
(RX-ES27) 4.5 kg without batteries
(RX-ES22) 4.0 kg without batteries
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
RQT6279-G (36-40)5
29/1/04, 2:25 PM
38