Panasonic SC-AK100 User Manual
12
Timer operations
RQT6351
A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning it
off.
During standby mode
You can reduce the power consumed in standby mode by turning it
off.
During standby mode
Hold down [
L
/–DEMO] until “NO DEMO” is displayed.
Every time you hold down the button:
NO DEMO (off)
NO DEMO (off)
↔
DEMO ON (on)
To show a demonstration of the display
Hold down [
L
/–DEMO] until “DEMO ON” is displayed.
Note
DEMO function cannot be turned on when Dimmer is on.
Convenient functions
Auto-off function
Setting the time
Remote control only
Turning the demo function off
To dim the display panel
Remote control only
Press [DIMMER].
The display is dimmed and the indicator is turned off.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
To mute the volume
Remote control only
Press [MUTING].
Press the button again to cancel.
“MUTING” goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.
“MUTING” goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
Hold down [–AUTO OFF].
“AUTO OFF” is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, “AUTO OFF” goes out. It
comes on again when you select disc or tape.
If you select tuner or AUX as the source, “AUTO OFF” goes out. It
comes on again when you select disc or tape.
To cancel
Hold down [–AUTO OFF] again.
Hold down [–AUTO OFF] again.
This is a 12-hour clock.
1
Switch on the power.
2
Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
3
(within 7 seconds or so)
Press [
g
/REW/
3
] or [
4
/FF/
f
] to set the time.
4
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you set
the time.
the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The time is shown for about 5 seconds.
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
SLEEP
–AUTO OFF
DEMO
1
3
2 • 4
Remote control only
Previous display
CLOCK
REC
PLAY