Philips FW-V330 User Manual

34

3140 115 29791

– Remove and reconnect the AC power plug and

switch on the system again.

– Adjust the volume.

– Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Make sure the MP3 disc was recorded within

32-256 kbps bit rate with sampling frequencies at
48 kHz, 44.1 kHz or 32 kHz.

– Check the speaker connections and location.

– Select the source (VCD 1/2/3 or TUNER, for

example) before pressing the function button
(

É,í,ë).

– Reduce the distance between the remote

control and the system.

– Insert the batteries with their polarities

(+/– signs) aligned as indicated.

– Replace the batteries.
– Point the remote control directly towards the IR

sensor .

– Set the clock correctly.
– Press and hold CLOCK•TIMER to switch on the

timer.

– If recording or tape dubbing is in progress, stop

recording.

– Power has been interrupted or the power cord

has been disconnected. Reset the clock/timer.

– Press and hold 

Çon the system to switch off

the demonstration.