Panasonic SC-PMX100/SC-PMX100B User Manual
21
RQT9
99
5
Reset the memory when the following situations occur:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
1
Disconnect the AC mains lead.
Wait 3 minutes before you continue with step 2.
Wait 3 minutes before you continue with step 2.
2
While you press and hold [Í/I] on the main unit,
connect the AC mains lead again.
“- - - - - - - - - - - -” is shown.
connect the AC mains lead again.
“- - - - - - - - - - - -” is shown.
3
Release [Í/I].
The settings are returned to the factory defaults.
The settings are returned to the factory defaults.
It is necessary to set the memory items again.
• To reset the network settings, perform the operation for
network reset. (> 18)
When other Panasonic equipment responds to the
remote control of this system, change the remote control
code for this system.
To set the code to “Remote 2”
To set the code to “Remote 2”
1
Press [SELECTOR] on the main unit to select
“CD”.
“CD”.
2
Press and hold [SELECTOR] on the main unit
and [2] on the remote control until “Remote 2” is
shown.
and [2] on the remote control until “Remote 2” is
shown.
3
Press and hold [OK] and [2] for a minimum of
4 seconds.
4 seconds.
• The factory default is “Remote 1”.
• To change the mode back to “Remote 1”, repeat the
steps above but replace the button pressed on the
remote control from [2] to [1].
Specifications
Power supply
AC 220 V to 240 V, 50 Hz
Power consumption 45 W
Dimensions (main unit)
(W x H x D) 211 x 114 x 267 mm
Mass (main unit)
Approx. 3 kg
Operating temperature range
0°C to +40°C
Operating humidity range
35% to 80% RH (no condensation)
RMS output power
Front Ch (both ch driven)
60 W per channel (3 ™), 1 kHz, 10% THD
Total RMS power
120 W
Preset memory
30 stations
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals
75 ™ (unbalanced)
DAB memories
20 channels
Frequency band (wavelength)
Band III
5A to 13F
(174.928 MHz to 239.200 MHz)
Sensitivity *BER 4x10
-4
Min requirement
–98 dBm
DAB external antenna terminal
F-Connector (75 ™)
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3*
3
)
Pick up
Wavelength 790 nm
(CD)
NORSK (NORWAY)
Bølgelengde 790 nm
(CD)
Laserstyrke
Ingen farlig stråling sendes ut
USB Port
Terminal Type: USB-A
USB port power
DC OUT 5 V 2.1 A
USB standard
USB 2.0 High Speed
Media file format support
MP3 (¢.mp3), AIFF (¢.aiff), FLAC (¢.flac),
WAV (¢.wav), AAC (¢.m4a)
Audio support format
MP3/AAC*
5
Sampling frequency
32/44.1/48 kHz
Audio word size
16 bits
Channel count
2 ch
AIFF/FLAC*
4
/WAV
Sampling frequency
32/44.1/48/88.2/96/176.4/192 kHz
Audio word size
16 bits/24 bits
Channel count
2 ch
USB device file system
FAT12, FAT16, FAT32
PC IN (EXT-IN)
Terminal Type: USB-B
USB standard
USB 2.0 High Speed
USB Audio Class specification
USB Audio Class 2.0, Asynchronous mode
Audio support format
LPCM
Sampling frequency
32/44.1/48/88.2/96/176.4/192 kHz
Audio word size
16 bits/24 bits
Channel count
2 ch
Ethernet interface
LAN (10BASE-T/100BASE-TX)
Headphones
Stereo, 3.5 mm jack
AUX IN (EXT-IN)
Pin jack
Memory reset (initialisation)
Remote control code
General
Power consumption in standby mode
(When “BLUETOOTH Standby” is “Off”)*
1,
*
2
0.45 W (approximate)
(When “BLUETOOTH Standby” is “On”)*
1,
*
2
0.5 W (approximate)
(When in Network standby)*
1
6 W (approximate)
Amplifier section
FM section
DAB section
( [PMX100B] )
Disc section
Terminals section
SC-PMX100-100B_EGEBGN-RQT9995-B.book 21 ページ ２０１５年４月２０日 月曜日 午後３時４５分