Panasonic SC-PT670 User Manual
15
RQ
TX02
10
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
Up to 30 stations can be set in each band, FM and AM.
A station previously stored is overwritten when another station is stored in
the same channel preset.
the same channel preset.
FM frequency step
Main unit only
The step is factory-set to 0.2-MHz, but you can change it to receive
broadcasts allocated in 0.1-MHz steps. You may need to change this
setting if the tuner seems to skip over the correct frequency for stations in
your area.
The step is factory-set to 0.2-MHz, but you can change it to receive
broadcasts allocated in 0.1-MHz steps. You may need to change this
setting if the tuner seems to skip over the correct frequency for stations in
your area.
1 Press [SELECTOR] to select “FM”.
2 Press and hold [SELECTOR].
2 Press and hold [SELECTOR].
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
e.g. 87.9 (Factory preset)
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
e.g. 87.9 (Factory preset)
,# 87.5
To return to the original step, repeat steps
1 and 2.
[Note]
After changing the setting, previously preset frequencies will be cleared.
Preset them again.
After changing the setting, previously preset frequencies will be cleared.
Preset them again.
Selecting the playback source
You can select desired source or access playback/menus by using the
START menu.
START menu.
When “Input select” is selected
You can select a desired source from the menu.
≥ DVD/CD (B 12, 13), FM (B 14), AM (B 14), AUX
≥ DVD/CD (B 12, 13), FM (B 14), AM (B 14), AUX
§
(
B 16),
DIGITAL IN
§
(
B 16), iPod (B 26)
§
“(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV
audio setting for VIERA Link “HDAVI Control” (
B 24).
When a disc is loaded, you can also access playback or menus from the
START menu.
START menu.
e.g.
[DVD-V]
When the on-screen control panel appears
e.g.
e.g.
[DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
Presetting stations manually
1 While listening to the radio broadcast
Press [OK].
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
≥ To select a 2-digit number
e.g. 12: [
S10] B [1] B [2]
Alternatively, press [
X, W], and then press [OK].
Main unit:
1 While listening to the radio broadcast
1 While listening to the radio broadcast
Press [MEMORY] twice.
2 While a channel number is flashing on the display
Press [
X TUNE W], and then press [MEMORY].
Selecting the source from the START menu
1
Show the START menu.
This unit automatically turns on.
(The TV also turns on when using VIERA
Link “HDAVI Control”. This works only when
in “DVD/CD” or “IPOD” mode without any
disc/device being loaded/connected.)
e.g.
(The TV also turns on when using VIERA
Link “HDAVI Control”. This works only when
in “DVD/CD” or “IPOD” mode without any
disc/device being loaded/connected.)
e.g.
2
Select an item.
≥ To exit, press [START].
3
Make the setting.
DVD
iPod
START
SETUP
EXT-IN
RADIO
OK
RADIO, EXT-IN
DVD
iPod
SETUP
START
OK
START
DVD/CD
Home theater
OK
RETURN
RETURN
Input select
OK
OK
DVD/CD
Home theater
OK
RETURN
RETURN
Input select
Playback Disc
TOP MENU (DVD)
MENU (DVD)
MENU (DVD)
Playback/menu access
RQTX0210-1P_670-673_Eng.book Page 15 Friday, April 3, 2009 2:48 PM