Polycom C12 User Manual

Hardware Installation Guide for the Polycom SoundStructure C16, C12, C8, And SR12

2 - 6

The Polycom SoundStructure can be mounted in an equipment rack, or placed 

on a tabletop or other flat surface, or mounted under the table with the 

optional undertable mounting kit.

Remove the four front screws on the enclosure. 

Align the rack ears, and install the rack ears using the screws that were 

removed from the enclosure.

Mount the equipment in the rack and secure with the four supplied rack 

mount screws (screw size is 10-32x1/2").

If the equipment will not be mounted in an equipment rack, it is 

recommended that you install the four adhesive rubber feet on the bottom 

of the device (as shown below) before placing the equipment on furniture.

Warning

Each SoundStructure device requires one rack space and does not require 
additional empty rack spaces above or below the device. 
When multiple devices are racked together, before final tightening of the rack mount 
screws on each device after the first one, ensure there is enough clearance so that 
the front-panel door will open freely.