Anritsu S113C User Manual
Interface Cable Installation
Communication between the Site Master and the PC is accomplished over a null modem se-
rial cable provided with the Site Master (Anritsu part number 800-441).
rial cable provided with the Site Master (Anritsu part number 800-441).
Step 1. Install the null modem serial interface cable to the Serial Interface connector on
the Site Master Test Connector Panel.
Step 2. Connect the other end of the serial interface cable to the appropriate COM port
connector on the PC.
Step 3. Turn on both the Site Master and the PC.
Using Software Tools
Select
Start
,
Programs
and select
Site Master Software Tools
.
If the proper command was sent to the Site Master from the PC a “remote” status will be
displayed on the Site Master display.
displayed on the Site Master display.
Downloading Traces from the Site Master
Downloaded traces from the Site Master can be selected as a entire block or as individual
files. Files are categorized by measurement type:
files. Files are categorized by measurement type:
Chapter 7 Software Tools Program
7-3
COM PORT
ERIAL INTERFACE
HOLD
RUN
START
CAL
CAL
AUTO
SCALE
SCALE
SAVE
SETUP
SETUP
RECALL
SETUP
SETUP
LIMIT
MARKER
SAVE
DISPLAY
DISPLAY
RECALL
DISPLAY
DISPLAY
PRINT
MODE
FREQ/DIST
AMPLITUDE
SWEEP
SYS
ENTER
CLEAR
ESCAPE
ON
OFF
/
1
2
4
5
6
7
8
9
0
3
+
-
.
Site Master S332C
Figure 7-2.
Serial Cable Connection
q
Return Loss
q
VSWR
q
DTF (Distance-to-Fault)
q
Time/Date stamp
q
SPA Traces with ACPR and CP