Yamaha AVX-S30 User Manual

■ Placing the Satellite Speakers

You can place the satellite speakers on a rack, or attach them to a wall. Please select an installation method that suits your 
room layout.

y

You can attach the satellite speaker to a commercially available speaker bracket or speaker stand using the screw holes on the bottom of 
the speakers. In this case, be sure to use 6M (diameter of 6 mm) screws.

y

Using non-skid pads prevents the speakers from sliding when 
they vibrate, and ensures quality sound production.

You can attach the speakers to a wall using commercially 
available screws (Diameter: 3.5 to 4 mm (1/8” to 5/32”), Length: 
24 mm (15/16”) or more). One speaker requires two screws.

• One speaker weighs about 1.4 kg (3 lbs 3 oz). To attach a speaker to a wall using screws, the wall must be firm. Do not attach a speaker 

to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the speaker to fall.

• Make sure you use specified screws to attach a speaker to a wall. Using clamps other than specified screws, such as short screws, nails, 

or two-sided tape, may cause the speaker to fall.

• When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets 

caught on a loose speaker cable, the speaker may fall.

• After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no responsibility for any accidents caused 

by improper installations.

■ Placing the subwoofer

y

Using non-skid pads prevents the subwoofer from sliding when it 
vibrates, and ensures quality sound production.