Panasonic SC-PT753 User Manual

RQ

TX00

44

EZ Sync

 

“HDAVI Control” is a convenient function that offers linked 

operations of this unit, and a Panasonic television (VIERA) under “HDAVI 
Control”. You can use this function by connecting the equipment with the 
HDMI cable. See the operating instructions for connected equipment for 
operational details.
This unit supports “HDAVI Control 2” function.
The TV with “HDAVI Control 2” function enables the following operation:
EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (

➜ right)

Preparation
≥ Confirm that the HDMI connection (

➜ page 6) has been made.

≥ Set “EZ Sync” to “On” (

➜ page 24, “HDMI” menu).

≥ To complete and activate the connection correctly, turn on all EZ Sync 

“HDAVI Control” compatible equipment and set the television to the 
corresponding HDMI input mode for the home theater system.

Whenever the connection or settings are changed, reconfirm the points 
above.

You can turn on the home theater system and television, and start playing 
the disc in the play position with a single press of a button.

Press [ONE TOUCH PLAY].
Theater speakers will be automatically activated (

➜ right).

≥ This function also works if you press [1 PLAY] on the home theater 

remote control during home theater standby mode.

[Note]

Playback may not be immediately displayed on the television. If you miss 
the beginning portion of playback, press [

:] or [6] to go back to 

where playback started.

≥ When you switch the television input to:

– TV tuner mode, the home theater system will automatically switch to 

“AUX”.

– HDMI input mode for the home theater system, the home theater 

system will automatically switch to “DVD/CD” if it is in “AUX” mode.

≥ When you start disc play, the television will automatically switch to the 

HDMI input mode for the home theater system.

You can select whether audio is output from the home theater system or 
the television speakers by using the television menu settings. For details, 
refer to the operating instructions of your television.

Home theater
Theater speakers are active.
≥ When the home theater system is in standby mode, changing the television 

speakers to theater speakers in the television menu will automatically turn 
the home theater system on and select “AUX” as the source.

≥ The television speakers are automatically muted.
≥ You can control the volume setting using the volume or mute button on 

the TV’s remote control. (The volume level is displayed on the main 
unit’s FL display.)

≥ To cancel muting, you can also use the home theater remote control (

➜ page 10).

≥ If you turn off the home theater system, television speakers will be 

automatically activated.

TV
Television speakers are active.
≥ The volume of the home theater system is set to “0”.

– This function works only when “DVD/CD” or “AUX” is selected as the 

source on the home theater system.

≥ Audio output is 2-channel audio.

≥ When switching between the theater and television speakers, the TV 

screen may be blank for several seconds.

When the television is turned off, the home theater system goes into 
standby mode automatically.
≥ This function works only when “DVD/CD” or “AUX” is selected as the 

source on the home theater system.

≥ When the television is turned on, the home theater system does not turn 

on automatically. (Power on link is not available.)

[Note]

Only the home theater system turns off when you press [

Í] for shutting it 

down. Other connected equipment compatible with EZ Sync “HDAVI 
Control” stays on.

You can control the disc menus of the home theater system with the TV’s 
remote control when using the “DVD/CD” source. When operating the 
TV’s remote control, refer to the below illustration for operation buttons.

1

Select the theater operation menu by using 
the television menu settings.
(For details, refer to the operating instructions 
of your television.)
≥The home theater system will automatically 

switch to “DVD/CD” if it is in “AUX” mode.

2

Select the desired item.
≥“TOP MENU”:

Shows a disc top menu 
(

➜ page 15, 18) or 

program list (

➜ page 19).

≥“MENU”:

Shows a disc menu 
(

➜ page 15, 18) or play 

list (

➜ page 19).

≥“Control Panel”: The basic operations for 

discs are available.

[Note]

≥ Depending on the menu, some button operations cannot be performed 

from the TV’s remote control.

≥ “Control Panel” can be selected directly by using a button on the TV’s 

remote control (e.g. [SUB MENU]).

0044En_p26-40.fm  Page 26  Monday, February 12, 2007  4:09 PM