Panasonic 744T User Manual

Hardware Descriptions 

11

1)  

XLR Input 1/AES3 Input 1&2 

Dual function input connection. Input 
type set with switch above. Active-bal-
anced analog microphone- or line-level 
input for input 1. Transformer-balanced 
two-channel AES3 input (1 and 2). 

2)  

XLR Input 2/AES3 Input 3&4 

Dual function input connection. Input 
type set with switch above. Active-bal-
anced analog microphone- or line-level 
input for input 2. Transformer-balanced 
two-channel AES3 input (3 and 4). 

3)  

Mic-Line-AES3 Input Switch 

Selects the input level and mode of the 
associated XLR input connector. 

4)  

TA3 Channel 3&4 Line Inputs 

Active-balanced line-level input connec-
tors. Pin-1 ground, pin-2 (+), pin-3 (

−

). 

5)  

TA3 Master (L/R) Analog Outputs 

Active-balanced, line-level analog L/R 
outputs for the Master Output Bus. Pro-
gram source and attenuation level are 
user selectable. Pin-1 ground, pin-2 (+), 
pin-3 (

–

). 

6)  

Headphone Output  

3.5 mm TRS stereo headphone connec-
tor. Can drive headphones from 8 to 
1000 ohm impedances to required levels. 
Tip left, ring right, sleeve ground. 

7)  

Headphone Volume 

Adjusts the headphone volume. NOTE: 
the 744T is capable of producing ear-
damaging levels in headphones. 

8)  

Tape Output 

Unbalanced tape (–10 dBv nominal) 
output on 3.5 mm TRS stereo connector. 
Signal source is identical to the Master 
Output Bus. Tip left, ring right, sleeve 
ground.