Panasonic 744T User Manual
744T User Guide and Technical Information
22
firmware v. 1.04
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
HP Sources
Description
Tracks A,B MS
Tracks C,D MS
Tracks C,D MS
Stereo monitoring of discrete M (mid) and S (side) track pairs. Highlighted media is source of moni-
tor program. Upon playback will function as MS track monitor.
tor program. Upon playback will function as MS track monitor.
Monitor A,B MSm
Monitor C,D MSm
Monitor C,D MSm
Stereo monitoring of playback (post-record) discrete M (mid) and S (side) track pairs. Highlighted
media is source of monitor program. When not in playback, headphones have no program.
media is source of monitor program. When not in playback, headphones have no program.
When tracks (A, B, C, or D) are assigned to headphones, audio assigned to the tracks appear in head-
phones during recording whereas the recorded track audio appear in headphones during playback.
phones during recording whereas the recorded track audio appear in headphones during playback.
To set the available headphone source options for headphone monitoring enter the HP: Monitor
modes menu. Once you enter the Monitor Modes menu you will immediately be in slot-1. Rotate the
Multi-Function Controller to select the source you wish to appear fi rst in your Headphone moni-
tor list. Once the chosen source appears, press the Multi-Function Controller or the soft key ENTER
(tone) key to move to the next slot. Continue down the list to select the source for each slot in the list.
Once all sources have been chosen, press (done). This will exit the headphone monitor mode setup.
You can exit the selection process by pressing the stop or cancel (backlight) key at any time.
modes menu. Once you enter the Monitor Modes menu you will immediately be in slot-1. Rotate the
Multi-Function Controller to select the source you wish to appear fi rst in your Headphone moni-
tor list. Once the chosen source appears, press the Multi-Function Controller or the soft key ENTER
(tone) key to move to the next slot. Continue down the list to select the source for each slot in the list.
Once all sources have been chosen, press (done). This will exit the headphone monitor mode setup.
You can exit the selection process by pressing the stop or cancel (backlight) key at any time.
If you press (done) in the fi rst headphon slot, the 744T will select a single option (Tracks A, B) for head-
phone monitoring. The 10 factory presets will be erased.
phone monitoring. The 10 factory presets will be erased.
Multi-Function Controller Behavior
The action of the Multi-Function Controller during recording and playback is set from among the
four available options:
four available options:
• Disabled: pushing the controller has no effect.
• Selects Favorite Mode: places the headphone source into the mode selected in the HP Favorite
• Selects Favorite Mode: places the headphone source into the mode selected in the HP Favorite
menu.
• Headphones to C/D meters: shows the level of the headphone output on the C/D track me-
ters.
• Playback/Monitor Drive Select: pushing the controller toggles between the available media to
select the drive available for playback and track monitor while recording.
Headphone Favorite Selection
If “Selects Favorite Mode” (above) is selected, a press of the Multi-Function Controller selects the
assigned “Headphone Favorite” audio source. This feature is helpful to quickly return to a selected
headphone monitoring source while recording or playing. All possible headphone sources are avail-
able to choose as the Headphone Favorite. The Headphone Favorite is selected in setup menu #60.
assigned “Headphone Favorite” audio source. This feature is helpful to quickly return to a selected
headphone monitoring source while recording or playing. All possible headphone sources are avail-
able to choose as the Headphone Favorite. The Headphone Favorite is selected in setup menu #60.
Headphone Playback Mode
The user may select a headphone source that will automatically be selected by the 744T upon play-
back. All headphone source selections are available for Headphone Playback Mode, as well as “No
Change”, which leaves the headphone source set to the currently selected mode. Headphone Play-
back Mode is controlled in setup menu #61.
back. All headphone source selections are available for Headphone Playback Mode, as well as “No
Change”, which leaves the headphone source set to the currently selected mode. Headphone Play-
back Mode is controlled in setup menu #61.
Warning Tones
The 744T can generate an audible beep, or warning “bell”, in the headphones when an error has oc-
curred. The specifi c error will be reported on the LCD. The output level of the warning bell is menu-
selectable from off to 0 dBFS in setup menu #62.
curred. The specifi c error will be reported on the LCD. The output level of the warning bell is menu-
selectable from off to 0 dBFS in setup menu #62.