Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. SC-PT 250
  5. User Manual

Panasonic SC-PT 250 User Manual

Download
Page of 40
OTHER OPERA
TIONS
ENGLISH
34
RQT8043
RQTX0055
Optional USB connection and operation (continued)
Operating the television
Operating the television
You can use the remote control to operate a Panasonic 
television.
Aim the remote control at the television.
To switch the television on or off
To switch the television’s video input mode
Adjust the volume
To play audio from your television through your home 
theater system
Preparation
Connect your equipment referring to “Connect to the 
various television terminals” (
\ page 11).
For Continental Europe
Press [EXT-IN] to select “AV” as the source. Then reduce 
the volume on the television to its minimum, and control the 
volume on this main unit.
For Southeast Asia, Thailand, the Middle East, South Africa, 
Saudi Arabia and Kuwait
Press [EXT-IN] to select “AUX” as the source. Then reduce 
the volume on the television to its minimum, and control the 
volume on this main unit.
Note
•  The remote control may not work properly with some models.
•  You can enjoy 5.1-channel surround sound when you turn on 
Super Surround (MOVIE, MUSIC) (
\ page 29).
Changing the main unit and remote control
Changing the main unit and remote control
The remote control and main unit are factory-set to 
“REMOTE 1” mode.
If your remote control affects other equipment during 
operation, you can switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode
1
 
While pressing and holding [
¡
/  
¢
] on the main unit
 
“REMOTE 2” appears on the main unit display.
2
  To operate in “REMOTE 2” mode
  
+  
  (Press and hold for 2 seconds)
To return to “REMOTE 1” mode
Perform steps 1 and 2 but use [1] instead of [2] for both 
steps. (“REMOTE 1” appears on the main unit during step 
1.)
The remote control cannot work with the main unit if
their modes are different.
“REMOTE 1” or “REMOTE 2” appears on the main unit 
display when you operate the remote control.
•  If “REMOTE 1” appears (The main unit is in “REMOTE 1” 
mode.)
  Press and hold [ENTER] and [1] on the remote control for 
at least 2 seconds.
•  If “REMOTE 2” appears (The main unit is in “REMOTE 2” 
mode.)
  Press and hold [ENTER] and [2] on the remote control for 
at least 2 seconds.
Note
You can still operate a television using the remote control 
(
\ see above) even after switching the mode.
 Operating other equipment (continued)
Compatible Devices
•
  Devices which are defi ned as USB mass storage 
class:
–  USB devices that support bulk only transfer.
–  USB devices that support USB 2.0 full speed.
Supported Formats
File name
File extension
Still pictures
JPG
*1
 .jpg .jpeg
Music
MP3
WMA
.mp3
.wma
Video
MPEG4 
*2
.asf
*1
 It may not be possible to play all the fi les due to the condition on 
how they were created.
*2
 For Panasonic D-Snap/DIGA.
Note
•
 
CBI (Control/Bulk/Interrupt) is not supported.
•  Digital Cameras that use PTP protocol or which require 
additional program installation when connected to a PC are not 
supported.
•  A device using NTFS fi le system is not supported. 
 
[Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is 
supported].
•  Depending on the sector size, some fi les may not work.
•  It will not operate with Janus enabled MTP (Media Transfer 
Protocol) devices.
•  Maximum folder: 256 folders
•  Maximum fi le: 4000 fi les
•  Maximum fi le name: 12 characters
•  Maximum folder name: 12 characters
•  Only one memory card will be selected when connecting a multi-
port USB card reader. Typically the fi rst memory card inserted.
RQTX0055-B_Out_new14.indd   34
RQTX0055-B_Out_new14.indd   34
3/16/07   6:48:57 PM
3/16/07   6:48:57 PM