Sony MHC-EC719IP Manual
13
GB
Tuner
MHC-EC919iP/EC719iP.4-467-786-22(1)
Tuner
Listening to the radio
1
Select the tuner function (FM/
AM).
AM).
Press TUNER (or FUNCTION on the
unit) repeatedly.
2
Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly
until “AUTO” appears, and then
press TUNING+/TUNING
. Scanning
stops automatically when a station
is found.
If the scanning does not stop, press
to stop scanning, then perform
manual tuning (below).
For manual tuning
Press TUNING MODE repeatedly
until “MANUAL” appears, and
then press TUNING+/TUNING
repeatedly to tune to the desired
station.
When you tune to a station that
When you tune to a station that
provides RDS services, the station
name appears on the display
(European model only).
Tip
To reduce static noise on a weak FM stereo
station, press REPEAT/FM MODE repeatedly
until “MONO” appears to turn off stereo
reception. You will lose stereo effect, but
reception will improve.
Presetting radio stations
1
Tune to the desired station.
2
Press TUNER MEMORY to
select the tuner memory
mode.
select the tuner memory
mode.
3
Press PRESET+/PRESET
repeatedly to select the
desired preset number.
desired preset number.
If another station is already
assigned to the selected preset
number, the station is replaced by
the new station.
4
Press to store the station.
5
Repeat steps 1 through 4 to
store other stations.
store other stations.
You can preset up to 20 FM and
10 AM stations. The preset stations
are retained for about half a day
even if you disconnect the power
cord or if a power failure occurs.
To tune to a preset radio station
If you registered a radio station to a
preset number 1 to 4, the radio station
will be tuned in by just pressing the
TUNER MEMORY NUMBER (1 to 4)
when the system function is set to FM
or AM.
If you registered a radio station
to a preset number 5 or higher,
press TUNING MODE repeatedly
until “PRESET” appears then press
PRESET+/PRESET
repeatedly to
select the desired preset number.