RCA RS2693 Leaflet

WARNING: ConneCting speakers other than the speakers 

supplied with the unit, may damage the unit.

CAUTION: to reduCe the risk oF Fire or eleCtriC shoCk, do 

not remoVe CoVer (or BaCk). no user-serViCeaBle parts 

inside. reFer to QualiFied serViCe personnel.

WARNING:  to  preVent  Fire  or  shoCk  haZard,  do  not 

eXpose this applianCe to rain or moisture.

some of the following information may not apply to your particular product; however, as with any electronic product, precautions 

should be observed during handling and use.

read these instructions.

• 

keep these instructions.

• 

heed all warnings.

• 

Follow all instructions.

• 

do not use this apparatus near water.

• 

Clean only with a dry cloth.

• 

do not block any ventilation openings. install in accordance with the manufacturer’s instructions.

• 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that 

• 

produce heat.

do not defect the safety purpose of the polarized or grounding-type plug. a polarized plug has two blades with one wider than 

• 

the other. a grounding type plug has two blades and a third grounding prong. the wide blade or the third prong is provided for 

your safety. 

If the provided plug does not fit into your wall outlet, consult an electrician for replacement of the obsolete outlet.

protect the power cord from being walked on or pinched particularly

• 

at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments / accessories specified by the manufacturer.

• 

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 

• 

when a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

unplug this apparatus during lightning storms or when unused for long periods of time.

• 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, 

• 

such as the power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has 

been exposed to rain or moisture, does not operate normally, or has been dropped.

do not use your system immediately after transporting it 

• 

from a cold place to a warm place, as condensation may 

cause the system to malfunction. if moisture forms inside 

this system, it may not operate properly. to correct the 

problem, turn off the power and wait about 30 minutes for 

moisture to evaporate.

This system is fitted with a laser. To avoid accidents, it is to 

• 

be opened by qualified technicians only.

never leave the tray open as dust could cover the laser lens 

• 

and / or the tray could be bumped into accidentally.

do not palce the system near wet areas such as bathrooms 

• 

and pool inside. avoid storing the system at humid places or 

near abnormally heated areas.

main plug is used as the disconnected device, it shall remain 

• 

operable and should not be obstructed during intended use. 

to be completely disconnected the apparatus from supply 

mains, the main plug of the apparatus shall be disconnected 

from the mains socket outlet completely.

ensure minimum distance around the apparatus for 

• 

sufficient ventilation. The ventilation should not be impeded 

by covering the ventilation openings with items, such as 

newspaper, etc.

No naked flame source, such as lighted candles, should be 

• 

placed on the apparatus.

when you are not going to use the unit for a long period of 

• 

time, disconnect the aC power cord.

excessive sound pressure form earphones and headphones 

• 

can cause hearing loss.

Before you Begin

general Controls

remote Control

   press to stop playing a disc while in Cd mode.

   indicates when the unit is on.

   when lit, it indicates that the unit is in programmable    

 playback mode.

   displays the current frequency selected.

   press to start / pause playing a disc while in Cd mode.

   rotate this knob to tune in the desired station.

   Connect the cable from external audio equipment to this 

 jack.

   press to open / close the disc door.

   rotate this knob to adjust the volume.

• Point the remote control at the REMOTE SENSOR located on 

the unit.

• When there is a strong ambient light source, the performance 

of the remote’s infrared may be degraded, causing unreliable 

operation.

• The operating range for remote operation is approximately 13 

feet (4 m).

when the battery becomes weak, the operating distance of the 

remote control is greatly reduced and you will need to replace 

it.
CAUTION:  danger  of  explosion  if  battery  is  incorrectly 

replaced. replace only with the same or equivalent type.

WARNING: Battery should not be exposed to heat such as 

sunshine, fire or the like.

• Remove the protective plastic tab before operating the remote 

control.

1. Open the battery door.

2. insert one Cr2025 (3V) size battery.

WARNING: the apparatus shall not Be eXposed to dripping 

or splashing and that no oBJeCts Filled with liQuids, 

suCh as Vases, shall Be plaCed on the apparatus.

use oF Controls or adJustments or perFormanCe oF 

proCedures other than those speCiFied may result in 

haZardous radiation eXposure.

Before operating, make sure the voltage requirement of the mains 

• 

plug matches your local voltage.

disconnect the mains plug immediately if liquid spills into or onto the 

• 

unit, or if an object falls into the unit. the unit should not be used until 

service by a qualified service personnel is completed.

do not open the cabinet. lasers used in rays employed by the unit 

• 

may damage your eyes. Any servicing should be done by qualified 

service personnel.

when you are not going to use the unit for a long period of time, 

• 

disconnect the mains plug.

do not leave, mount or use the unit in places which are extremely hot, 

• 

cold, dusty, or humid.

allow adequate air circulation to prevent internal heat build-up. do 

• 

not place the unit on a surface or near materials (a curtain ex. rugs, 

blankets, curtains, etc.) which might block the ventilation holes.

when left in a heated room where it is warm and damp, water droplets 

• 

or condensation may form inside the Cd player. when there is 

condensation inside the unit, the unit may not function normally. let it 

stand for 1 to 2 hours before turning the power on, or gradually heat 

the room and allow the unit to dry before use.

the symbol for Class ii

this product 

contains a low 

laser device.

the following markings and symbols are located on the back of the unit.

this device complies with part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

this equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential installation. this equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications.

however, there is no guarantee that interference will not occur in a 

particular installation. if this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

reorient or relocate the receiving antenna.

• 

increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to 

• 

which the receiver is connected.

Consult the dealer or an experienced radio / tV technician for help.

• 

this Class B digital apparatus complies with Canadian iCes-003.
WARNING: Changes or modifications to this unit not expressly approved 

by the party responsible for compliance could void the user's authority to 

operate the equipment.

the  lightning  flash  with  an  arrowhead  symbol,  within  the 

equilateral triangle, is intended to alert the user to the presence 

of uninsulated "dangerous voltage" within the product's enclosure 

that may be of sufficient magnitude to cause an electric shock.
the exclamation point within the equilateral triangle is intended 

to alert the  user  to  the  presence of important operating  and 

maintenance (servicing) instructions in this owner’s manual.

the aC power plug is polarized (one blade is wider than the 

other) and only fits into AC power outlets one way. If the plug 

won't go into the outlet completely, turn the plug over and try 

to insert it the other way. If it still won't fit, contact a qualified 

electrician to change the outlet, or use a different one. do 

not attempt to bypass this safety feature.

V2.0 (en)

                                                            user 

it's important to read this instruction prior to using your new product for 

the first time.

safety precautions

technical information

product: Cd micro system

Band: rCa

model: rs2693

Power Supply: AC 120V ~ 60Hz

in the event that service should be required, you may need the 

model number. in the space below, record the date and place 

of purchase:
model no.
date of purchase
place of purchase

this product should be serviced only by those specially trained 

in appropriate servicing techniques. For instructions on how to 

obtain service, refer to the warranty included in this guide.

technical information

system Connections

radio operations

service information

important safety instructions

safety precautions

CAUTION :

DO NOT

TOUCH THE LENS.

ATTENTION :

Radiation invisibles du laser en cas d'ouverture et de

défaillance ou de mise hors service du dispositif de

verrouillage. Eviter toute exposition directe au faisceau.

Invisible laser radiation when open and interlock failed or

defeated. Avoid direct exposure to beam.

CLASS 1 LASER PRODUCT

APPAREIL À LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

PRODUTO LASER CLASSE 1

20

21

22

23

1
2

3

4
5

6

7

8

9

10

11
12

13
14

15

16

17

18

19

1

2
3
4

5

6
7

8
9

10

12

11

13
14
15

16

17
18

19

1

2

3
4
5
6

   Connect the aC power cord to the wall outlet.

   press to repeat one track / all tracks.

   press to combine your favorite tracks and play them in the  

 order you define.

Connect the aC power cord into a wall outlet.

note: 

to prevent electric shock, match wide blade of aC power 

• 

cord to wide slot of aC power outlet, then fully insert.

when you are not going to use the unit for a long period 

• 

of time, disconnect the aC power cord.

Connect the wires from the left & right speaker to the corre-

sponding speaker terminals.

1.  slide the FunCtion selector to tuner. 

  the power on indicator lights up.

2.  slide the Band selector to desired band (am/Fm). 

3.  tune into a station.

4.  adjust the volume level.

FM

AM

CD

STANDBY

AUX

TUNER

Fully  unwind  the  wire  antenna. 

then  extend  the  wire  antenna 

and  place  it  in  the  position  that 

sounds best.

(when the Fm broadcast signal 

is  strong,  it  can  receive  Fm 

stereo Broadcast.)

rotate the unit to get the best 

receiving position.

AFTER LISTENING, slide the FunCtion selector to standBy.

- 1 -

- 2 -

- 3 -

- 5 -

- 6 -

- 4 -

- 9 -

  - 10 -

- 8 -

- 7 -

  - 13 -

- 12 -

- 11 -