Sharp CD-SW300 User Manual

Page of 44
 
03/12/17
CD-SW300 02-14.fm
 
6
 
CD-SW300
 
General Information
 
Precautions
  
General
  
Please ensure that the equipment is positioned in a well ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.
  
Do not place anything on top of the unit.
  
Do not expose the unit to moisture, to temperatures higher than
140
 
˚
 
F (60
 
˚
 
C) or to extremely low temperatures.
  
If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.
  
This unit should only be used within the range of 41
˚
F - 95
˚
(5
˚
C - 35
˚
C).
 
Warning:
 
The voltage used must be the same as that specified on this unit. 
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of 
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
 
  
Volume control
 
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs while turning the unit on
with the volume control setting up high, or while continually listening
at high volumes. 
  
Do not place subwoofer system on the 
same surface as main unit to prevent 
sound interruption during playback.
  
Use the unit on a firm, level surface free from 
vibration.
  
Keep the unit away from direct sunlight, 
strong magnetic fields, excessive dust, 
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.) 
which generate electrical noise.
  
In case of an electrical storm, unplug the 
unit for safety.
4" (10 cm)
Table
Floor
4" (10 cm)
4" (10 cm)
4" (10 cm)
  
Hold the AC power plug by the head when 
removing it from the AC outlet, as pulling 
the cord can damage internal wires.
  
Do not remove the outer cover, as this 
may result in electric shock. Refer 
internal service to your local SHARP 
service facility.
AC INPUT