Sony LBT-ZUX9 Manual

Page of 64
24
US
Recording from a disc 
onto a USB device
You can record music from a disc to an 
optional USB device (Digital music 
player or USB storage media) by 
connecting it to the 
 (USB) port on 
the unit.
You can record from an AUDIO CD or
MP3 disc. The audio format recorded by 
this system is MP3. The approximate size 
of the recording from an AUDIO CD is 
about 1 MB per minute of recording time.
See “Playable/Recordable USB devices” 
(page 6) for a list of USB devices that
can be connected to this system.
Note
The tracks those are recorded onto the USB 
device is for personal use only.
There are two ways to record a disc onto a 
USB device.
CD-USB Synchro Recording:
You can easily record an entire disc onto 
a USB device.
REC1 Recording:
You can easily record a track that is 
currently being played back onto a USB 
device.
1
Connect a recordable USB 
device to the 
 (USB) port on 
the unit.
2
Prepare the recording source.
For CD-USB Synchro Recording:
Press CD, then load the discs you want 
to record on the disc tray.
Select the play mode of CD player as 
below.
However, the play mode automatically 
changes to Normal Play, if you start 
recording in Program Play with no 
tracks are programmed, Shuffle Play 
or Repeat Play.
For REC1 Recording:
Press CD, then load the disc you want 
to record on the disc tray. Select the 
track you want to record, then press 
NX (or N on the remote).
3
Set the USB device stand by for
recording and the disc pauses 
for playback.
For CD-USB Synchro Recording:
Press CD-
SYNC/REC 1.
“USB” and “SYNC” light up and 
“REC” flashes in the display. The 
display cycles through “CD-USB 
SYNCHRO”, “Push ENTER” and 
“xxxxxxByte Free Space” (remaining 
space on the USB device)*.
USB Device
USB device 
(Digital music player or 
USB storage media)
To record 
the track 
from
Press PLAY MODE on 
the remote repeatedly 
to select
all discs
ALL DISCS.
a disc
1 DISC.
an MP3 audio 
track folder
.
 
Then, press 
 +/– 
repeatedly to select the 
folder you want.
all discs in the 
order you 
want using 
Program Play
PROGRAM. Then, 
perform steps 3 to 6 of 
“Creating your own 
program” (page 22).
USB