Sony LBT-XG60 User Manual

You can preset 20 stations for FM and 10
stations for AM.

Each time you press this button, the band
changes as follows:

FM 

y AM

Scanning stops when the system tunes in a
station.  “TUNED” and “STEREO” (for a
stereo program) appear.

The next available preset number flashes in
the display. The stations are stored from
preset number 1.

“COMPLETE” appears and the station is
stored.

Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press +/–
to tune in the station.

Start over from step 1. After step 4, press +/– to
select the preset number you want to store for
another station.

You can add a new preset number after the last
preset number.

Hold down TUNER MEMORY until a preset
number appears.

Press +/– to select the preset number you
want to erase.

Select “ALL ERASE” when you want to
erase all the preset stations.

Press ENTER.

“COMPLETE” appears.

When you erase a preset number, the preset
number decreases by one and all preset
numbers following the erased one are
renumbered.

The AM tuning interval is factory set to 9 kHz (10
kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off the
power. While holding down the ENTER button, turn
the power back on. When you change the interval,
AM preset stations will be erased. To reset the
interval, repeat the same procedure.

The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.

Preset number

MHz