Sony LBT-XG60 User Manual

Press FUNCTION repeatedly
until “PHONO” appears.

1 Remove the jumper from

the unit.

2 Connect the SEND jack of

the unit to the IN jack of the
mixer with an optional
cable.

3 Connect the RETURN jack

of the unit to the OUT jack
of the mixer with an
optional cable.

4 Press FUNCTION

repeatedly until “CD”
appears.

Listen to the
connected turntable

Listen to the
connected mixer

To the outputs
of your mixer

To the audio outputs
of your turntable

To the inputs of
your mixer

You can also record the sound produced by the mixer
onto a tape.

• Using a turntable at high volume may cause

distortion or howling. This is often caused by the
bass  sound from the speakers. The bass sound may
produce the distortion or howling. To avoid this, do
the following:
1 Keep some distance from speakers and the

turntable.

2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and

stable surface.

4 Press SUPER WOOFER repeatedly until the

indicator on this button goes off.

• Replace the jumpers when the mixer is not in use.

Otherwise, no sound will be heard. Be sure to
connect the  jumpers from the RETURN jack to the
SEND jack  of the unit.
Two jumpers are pre-installed connecting the DJ
MIX RETURN and SEND jacks.