Genesis Advanced Technologies 1.1 User Manual

Page of 27
 
 
Ver 2.0 
 
19
19
19
19
~ÄëçäìíÉ=ÑáÇÉäáíó
 
the mid-bass regions. Keep the low-pass below 115Hz except in 
exceptionally large rooms. 
Another good rule of thumb is to first set the volume control of the 
woofer towers for proper mid-bass rather than low bass. The theory is 
that if the mid-bass is correct, then the low bass should be very close 
to correct. If the mid-bass is proper and the low bass is still not right, 
here are some other suggestions: 
A good balance between proper low bass extension and a deep and 
spacious soundstage needs to be established to optimize your new 
speaker's performance. 
In order to achieve what the speaker is capable of, we suggest you 
focus your efforts on a proper balance of soundstage elements that 
includes information beyond the left and
 right sides of the speakers; 
front to back depth well behind the speaker, excellent focus of 
instruments and voices with proper vertical information and mid-bass 
fill. 
A Genesis loudspeaker system, correctly set up, can and should 
provide a soundstage that goes beyond the confines of the walls of 
your listening room, and yet with pinpoint focus; the speakers 
disappearing completely on a recording containing such information. 
3.5 Room Treatment 
No room is perfect. To optimize your sonic presentation it may be 
helpful to treat your room. Here are some guidelines: 
1. 
Front walls. The G1.1 loudspeaker is a dipole and therefore 
there is sound coming from both the front and the back. How 
the front wall is treated or not treated is important. Do not use 
either diffusion or absorption on the front wall. The “focus lens” 
used by some room designers is likely to be detrimental to all 
Genesis loudspeakers. 
 
Generally speaking, the Genesis loudspeakers prefer a live 
front wall. By these terms we mean the amount of reflection of 
sound. A typical wall of glass, brick, cement or drywall material 
is a highly reflective “live” surface.  
 
A heavily
 curtained or sound-proofed wall would be considered 
a "dead wall" or a non-reflective wall. A normal thin curtain 
across a window causes only a small amount of absorption.