Denon AVR-4806CI User Manual

Page of 202
108
Advanced Setup – Part 1
2
Press the 
CURSOR
D
or H
button to select the
setting, then press the 
CURSOR
F
or G
button
to select the parameter.
Analog to HDMI Convert:
• ON:
Setting for converting analog video signals into
HDMI signals.
• OFF:
Setting for not converting analog video signals into
HDMI signals.
Color Space:
• Y Cb Cr:
The Y Cb Cr format video signals is output via the
HDMI output connector.
• RGB:
The RGB format video signals is output via the
HDMI output connector.
Setting the HDMI Out Setup
• Set whether to use the analog video signals to HDMI
conversion function.
• When using this conversion function, set the color format
and video range of the signals output from the HDMI terminal.
1
Press the 
CURSOR
D
or H
button to select
“HDMI Out Setup” at the “Video Setup”
menu, then press the 
ENTER
button.
• Display the “HDMI Out Setup” screen.
Aspect:
• FULL:
The video is output while maintaining the aspect
ratio of the input video.
This mode is suited for playing back 16:9 video.
• NORMAL:
A black band is added to the left and right of the
input video and the video is output.
This mode is suited for playing back 4:3 video.
RGB Mode Setup:
• Normal:
Signals are output via the HDMI output connector
with a digital RGB video range (data range) of 16
(black) to 235 (white).
• Enhanced:
Signals are output via the HDMI output connector
with a digital RGB video range (data range) of 0
(black) to 255 (white).
When the HDMI connector is connected, the black
may seem to stand out, depending on the TV or the
monitor. In this case, set this to “Enhanced”.
When “Y Cb Cr” is selected under “Color Space”,
“RGB Mode Setup” will have no effect.
The aspect ratio setting is valid when the resolution is
set to 1080i, 720p or 1080p. To output with other
resolutions, set the aspect ratio on the TV.
When “Through” is set, the signal is output with the
same resolution as input from the video, S-Video and
component video terminals.
The OSD, however, is output with a resolution of 480i,
so use a monitor compatible with this resolution.
3
Press the 
ENTER
button to enter the setting.
• The “Video Setup” menu reappears.
Resolution:
• 480p/576p:
When the video signal being input is a video, S-Video
or 480i/576i component video signal, the resolution
is converted to 480p/576p and the signal is output
from the HDMI MONITOR OUT terminal.
• 1080i:
When the video signal being input is a video, S-Video
or 480i/576i/480p/576p component video signal, the
resolution is converted to 1080i and the signal is
output from the HDMI MONITOR OUT terminal.
• 720p:
When the video signal being input is a video, S-Video
or 480i/576i/480p/576p component video signal, the
resolution is converted to 720p and the signal is
output from the HDMI MONITOR OUT terminal.
• 1080p:
The input video signal is converted to a resolution of
1080p for output.
• Through:
The video signal being input is output as such from
the HDMI MONITOR OUT terminal without being
converted.