Denon AVR-4806CI User Manual

131

Advanced Setup – Part 2

• Please set all THX Certified speakers to small and the

crossover to 80 Hz.

• We recommend using with the crossover frequency set to

“FIXED–THX–”, but depending on the speaker, setting it to a
different frequency may improve frequency response near
the crossover frequency.

• The crossover frequency mode is valid only when subwoofer

is set to ON, and when one or more speakers are set to
SMALL, as described in section “Speaker Configuration”
settings (

page 125, 126).

Press the

CURSOR

F or G

G button to select

“Advanced” at the “Crossover Frequency”
screen.

Press the

CURSOR

D or H

H button to select the

speaker to be set.

• If “LFE–THX–” is selected at “Subwoofer Setup”, the

frequencies can only be selected for speakers set to “Small”
at “Speaker Configuration”.

• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies

can be selected regardless of the speaker size setting.

Selecting the Surround Speakers for the
different surround modes

• This menu is displayed when both surround speakers A and

B are used.

• At this screen preset the surround speakers to be used in

each surround modes.

Press the

CURSOR

D or H

H button to select

“Surround Sp Setup” at the “Speaker Setup”
menu, then press the

ENTER

button.

• Display the “Surround Sp Setup” screen.

• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”

(

page 126, 127) is displayed at the top right of the

screen.

Press the

CURSOR

F or G

G button to select the

frequency.

¢ Setting the crossover frequency individually for

the different channels