Denon AVR-4806CI User Manual

35

HDMI

OUT

HDMI

IN

• A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High-Definition Multimedia

Interface) connector allows digital transfer of the digital images of DVD-Video and other sources, and the multi-channel sound
of DVD-Audio and DVD-Video.

• To provide audio output from AVR-4806CI’s audio output connector, select “Amp” at the System Setup.

To provide audio output from the TV, select “TV” at the System Setup. For details, see “Setting the HDMI/DVI In Assign” (
page 106, 107).

C

C

LINEAR PCM

DTS

Dolby Digital

C

C

LINEAR PCM

PACKED PCM

(with CPPM / without CPPM)

C

C

C

C

C

C

LINEAR PCM

E

E

Multi area

CD area

Stereo area

E

E

C

C

¢ Copyright Protection System

To play back the digital video and audio of DVD-Video and
DVD-Audio through an HDMI/DVI-D connection, both the
connected player and monitor are required to support a
copyright protection system called HDCP (High-bandwidth
Digital Content Protection System). HDCP is copy
protection technology that comprises data encryption and
authentication of the partner equipment. 
The AVR-4806CI supports HDCP. Please see the operating
instruction of your video display for more information
about this.

NOTE:
• The audio signals on the multi/stereo area of Super Audio CDs are not output. If the Super Audio CD is a hybrid CD, only

the audio signals in the CD area are output.

• Use a compatible player to play DVD-Audio discs that are copyright protected by CPPM.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, the

AVR-4806CI cannot be controlled by another device via the HDMI connector.

• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the

equipment that is connected.

• The video signals are not output properly if a device not compatible with HDCP is used.
• When “Through” is set at “Resolution” under “Setting the HDMI Out Setup”, use a monitor compatible with input

resolutions of 480i/576i.

• The video signals input from the HDMI or DVI-D input terminals are output to the HDMI monitor with their original

resolution, so the image will not be displayed if the resolutions of the input signal and the monitor being used are not
matched. In this case, change the setting of the resolution on the source device (player) to one which the monitor can
handle.

• Use a cable including the HDMI logo (HDMI certified product) for connection of the HDMI terminal. Normal playback may

not be possible if a cable that does not include the HDMI logo (non-HDMI-certified product) is used.

The AVR-4806CI is HDMI Ver. 1.1 compatible.