Denon AVR-4806CI User Manual

44

Example: CD

(Main unit)

(Remote control unit)

To  select the input source when ZONE2 SELECT,
ZONE3/REC SELECT or TUNING PRESET is selected,
press the SOURCE button on the main unit then operate
the input function selector.

For operating instructions, refer to the component’s
manual.

The volume can be adjusted within the range of –80 to
+18 dB, in steps of 0.5 dB. However, when the
channel level is set (

page 64, 65 or 128 ~ 130), if

the volume for any channel is set at +0.5 dB or greater,
the volume cannot be adjusted up to 18 dB. (In this
case the maximum volume adjustment range is “18 dB
— (Maximum value of channel level)”.)
Also, you may not be able to adjust the volume to the
maximum of 18 dB when internal volume
compensation control is activated due to the
combination of the surround mode and parameters,
downmixing from multi-channel audio signals into two
channels, etc.

(Main unit)

(Remote control unit)

M.VOL. -80.0dB

The volume level is displayed on the master volume
level display.

¢ To choose the surround sound mode

Example: HOME THX CINEMA

For more information about the surround modes (
page 50 ~ 53).

¢ To select the Room EQ function

For more information about the Room EQ function
(

page 48).