Denon AVR-4806CI User Manual

Page of 202
73
Basic Operation
Using the Network Audio Function
Internet radio function
• The AVR-4806CI can be connected to a network by cable to listen to Internet radio or music files stored on computers.
Internet radio refers to radio programs broadcast over the
Internet.
There are many stations throughout the world broadcasting
Internet radio programs. These stations are of all sizes and
types, some run by individuals, others by ground wave
broadcast stations.
While ground wave radio stations can only be listened to within
the range in which the waves reach, Internet radio can be
listened to anywhere in the world.
The AVR-4806CI is equipped with the following Internet radio
functions:
• Stations can be selected by genre and region.
• Up to 56 Internet radio stations can be preset.
• MP3 format Internet radio programs can be listened to.
• Your favorite radio stations can be registered by accessing
the exclusive DENON Internet radio URL using a computer’s
browser. (The AV amplifier automatically downloads the
registration settings (approximately once every other day).)
(This is managed separately for each unit, so a MAC address
or e-mail address must be registered.) (
page 124)
Exclusive URL : http://www.radiodenon.com
(accessible after connection to an Internet radio station.)
¢ vTuner
The AVR-4806CI’s Internet radio station list uses “vTuner”,
a radio station database service. This database service is
edited and prepared for the AVR-4806CI.
The AVR-4806CI is equipped with a network audio playback
function allowing music files stored on a computer to be
played via a LAN (Local Area Network).
The AVR-4806CI’s network audio playback function connects
to servers using the following technologies:
• Windows Media Connect
• The Designed to DLNA Guideline
• Windows Media DRM 10 (for network devices)
Music server function
• The preparations described below must be made in order to
use the Internet radio and music server functions.
¢ Broadband Internet connection
A broadband connection to the Internet is necessary in
order to use the AVR-4806CI’s Internet radio function.
NOTE:
• You must have a contract with an Internet Service
Provider (ISP) in order to connect to the Internet. For
instructions on connecting to the Internet, contact your
ISP or a computer store.
If you already have a broadband Internet connection there
is no need to take out another contract.
¢ Modem
A modem is a device for exchanging signals over the
Internet using a broadband connection. Some are
integrated into routers. For instructions on connecting to
the Internet, contact your ISP or a computer store.
System requirements
¢ Router
A router is a device for connecting multiple pieces of
equipment (computers, the AVR-4806CI, etc.) to the
Internet simultaneously.
When using the AVR-4806CI, we recommend a router
equipped with the following functions:
• Built-in DHCP (Dynamic Host Configuration Protocol)
server.
Function for automatically assigning the device’s IP address
on the LAN.
• Built-in 100BASE-TX switch
When connecting multiple devices, it is recommended to
have a built-in switching hub with a speed of 100 Mbps or
greater.
NOTE:
• The type of router that can be used differs for different
ISPs. For details, contact your ISP or a computer store.
¢ Ethernet cable (CAT-5)
The AVR-4806CI does not come with an Ethernet cable.
Purchase one of the required length.
Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
If the sound is broken in an environment with the electric
products subject to much power noise or a noisy network
environment, use a shielded type Ethernet cable. This
could improve the sound.