Denon AVR-4806CI User Manual
74
Basic Operation
¢ Personal Computer
Install “Windows Media Connect” on your computer.
The required system for forming a music server is as
described below.
The required system for forming a music server is as
described below.
1) OS (Operating System):
Windows® XP Service pack2
2) Processor:
Intel Pentium
II
or AMD processor, etc..
We recommend 1 GHz or greater.
3) RAM:
Min. 128 MB, we recommend 256 MB or greater.
4) Software:
.NET Framework 1.1
5) Internet browser:
Microsoft Internet Explorer 5.01 or later
• LAN port required
• 300 MB or greater free hard disc space required
• 300 MB or greater free hard disc space required
Extra free space is necessary to store music files.
The following table gives an approximate estimate of the
required free space.
The following table gives an approximate estimate of the
required free space.
Per one hour
Per one
minute
Bit rate
Format
0
60 MB
0.
1 MB
0
128 kbps
MP3 / WMA
0
90 MB
1.5 MB
0
192 kbps
120 MB
0.
2 MB
0
256 kbps
180 MB
0.
3 MB
0
392 kbps
600 MB
.
10 MB
1400 kbps
WAV (LPCM)
¢ Others
• When the contract with your provider is of the type by
which the network settings are made manually, you must
make the “Network Setup” (
make the “Network Setup” (
page 123, 124).
• The AVR-4806CI is not compatible with PPPoE. If your
contract is of the PPPoE setting type, you need a PPPoE-
compatible router.
compatible router.
• For some ISPs (Internet Service Providers), you may have
to make proxy server settings in order to use the Internet
radio function. If proxy server settings for connecting to the
Internet have been made on the computer, make the same
settings on the AVR-4806CI.
radio function. If proxy server settings for connecting to the
Internet have been made on the computer, make the same
settings on the AVR-4806CI.
• The AVR-4806CI is designed to make the network settings
automatically using the DHCP and Auto IP functions.
A ~ G
: Preset memory blocks
•, ª
: Character search
MODE
: Configuration mode
selection
MEMO
: Preset and favorite
registration
•
,
ª
,
0
,
1
: Cursor up, down, left and
right
ENTER
: Enter settings
CH +, –
: Preset channel selection
1 ~ 8
: Preset numbers
¢ TU (Tuner) / DTU (Digital tuner) system buttons
The tuner or digital tuner system buttons shown on the
diagram below are used for Network Audio operations.
diagram below are used for Network Audio operations.
¢
Connections
Connect one side of the Ethernet cable (CAT-5) to the
ETHERNET terminal on the AVR-4806CI’s rear panel, the
other side to the router.
Connect one side of the Ethernet cable (CAT-5) to the
ETHERNET terminal on the AVR-4806CI’s rear panel, the
other side to the router.
Internet radio
Modem
To WAN side
To LAN side port
To LAN side port
Router
Computer
LAN port/ETHERNET port