Denon AVR-4806CI User Manual
95
Advanced Operation
Multi-source recording / playback
1
Press the
ZONE3/REC SELECT
button until
“RECOUT SOURCE” appears on the display.
• The “REC” indicator lights.
2
Turn the
FUNCTION
knob to select the source
you wish to record.
3
Set the recording mode.
For operating instructions, refer to the manual of the
component on which you want to record.
component on which you want to record.
R E C O U T S O U R C E
D V D
¢ Playing one source while recording another
(REC OUT mode)
¢ Recording Dolby Digital and DTS multi channel
sources
• With this set it is possible to record Dolby Digital and DTS
multichannel signals converted into 2-channel analog
signals.
signals.
• The recording signals are output to the TAPE and VCR
output terminals.
• Down-mixed analog signals converted into digital signals
are output from the OPTICAL 2, 3 and 4 digital output
terminals at this time.
terminals at this time.
1
Press the
ZONE3/REC SELECT
button until
“RECOUT SOURCE” appears on the display.
2
Press the
INPUT MODE
button to set the input
mode according to the source to be played.
3
Press the
DIRECT/STEREO
button to set the
surround mode.
• The multichannel digital signals are down-mixed and
output to the TAPE and VCR output terminals.
4
Set the recording mode.
• To cancel, turn the FUNCTION knob and select “SOURCE”.
• Recording sources other than digital inputs selected in the
• Recording sources other than digital inputs selected in the
REC OUT mode are also output to the ZONE3 audio/video
output terminals.
output terminals.
• When the REC OUT mode is selected, the ZONE3 button on
the remote control unit cannot be operated.
• When “ZONE2 SELECT” is selected at “Digital Out Assign”,
the source switches in association with the “ZONE2
SELECT” mode for the OPTICAL2 OUT terminal (
SELECT” mode for the OPTICAL2 OUT terminal (
page
121).
1
The Dolby Headphone play mode is set when
headphones are connected to the
headphones are connected to the
PHONES
jack
during playback in the DOLBY/DTS surround
mode.
mode.
• When this is done, signals encoded in the Dolby
Headphone mode are automatically output from the
recording output terminals (analog and digital) and
can be recorded.
recording output terminals (analog and digital) and
can be recorded.
2
Select the parameters and set the desired
mode.
mode.
• Start recording.
Refer to the “Dolby Headphone” (
page 59).
NOTE:
• Do not disconnect the headphones during recording.
• Do not disconnect the headphones during recording.
¢ Dolby Headphone recording
• When REC OUT mode is set to “SOURCE”, with the AVR-
4806CI it is possible to output signals encoded in the Dolby
Headphone mode from the recording output terminal and
record them on a separate recorder.
Headphone mode from the recording output terminal and
record them on a separate recorder.