JVC CA-DXJ35 User Manual

Page of 104
 
9
 
Adjusting the Volume
 
The volume level can be adjusted in 32 steps (VOLUME 
MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).
 
To drop the volume in a moment
 
Listening to the Radio
 
To select the AM tuner interval spacing
 
Some countries space AM stations 9 kHz apart, and other 
countries use 10 kHz spacing.
 
1
 
Select “TUNER AM,” then turn off (standby) the 
System.
 
2
 
Select the AM tuner interval spacing.
 
To select the band (FM/AM)
To tune in to a station
 
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is 
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency 
changes step by step.
 
To manually stop the searching,
 
 press either button.
 
If the FM reception is poor
 
To preset stations
 
You can preset 30 FM and 15 AM stations.
 
1
 
Tune in to a station you want to preset.
 
• You can also store the monaural reception mode for FM 
preset stations if selected.
 
2
 
Activate the preset number entry mode.
 
• Finish the following process while the indication on 
the display is flashing.
• To cancel the operation during procedure, press 
CANCEL while holding SHIFT.
 
3
 
Select a preset number for the station you store.
Remote control:
Main unit:
 
To restore the volume, 
press again or adjust the 
volume level.
 
To select 9 kHz:
To select 10 kHz:
Remote
ONLY
(while holding...)
INFO
Main Unit
ONLY
TUNER FM
AUX
TUNER AM
(while holding...)
(while holding...)
TUNER FM
TUNER AM
AUX
 
The MONO indicator lights on the 
display. Reception will improve though 
stereo effect is lost—monaural reception 
mode.
 
To restore the stereo effect,
 
 press the 
button again (the MONO indicator goes 
off).
• To select a number, see “How to 
select a number” on page 8.
• You can also use 
¢
 
/
4
 
buttons.
1
 sec.
Increases the frequency.
Decreases the frequency.
Remote
ONLY
Remote
ONLY
DX-J10_20_30[U].book Page 9 Friday, February 2, 2007 11:25 PM