EXSYS EX-44032 Leaflet

Page of 1
PCI-Express I/O Interface 
32S PCIe Serielle RS-232 Karte 
mit Octopus Kabel 
32S PCIe Serial RS-232 Board 
with Octopus cable 
Beschreibung 
Verpackung / Packaging 
System / OS 
Geprüft / Approved 
Die EX-44032 PCI-Express I/O Karte stellt 32 Serielle RS-232 High Performance 
UART 16C950 Ausgänge zur Verfügung. Sie ist entwickelt worden um 32 weitere 
Serielle Ausgänge für PC, kleine Workstation oder Server über den PCI Express 
Bus zu erweitern. Die EX-44016 wird mit vier Octopus Kabel geliefert. Die EX-
44032 benötigt keine externe Erweiterungs-Module. Alle Ausgänge werden über 
Octopus-Kabel nach aussen geführt. 
Merkmale 
• 
Schnittstelle: RS-232 V.24 
• 
FIFO Buffer: 16C950 mit 128Byte 
• 
I/O Adressen: werden vom Betriebs System vergeben  
• 
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing 
• 
Daten Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark 
• 
Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND 
• 
PCI Express Schnittstelle kompatibel zu 1.0a Spezifikation 
• 
WHQL Zertifiziert 
Spezifikationen 
• 
Chip-Set:  Oxford 
OXPCIe958 
• 
Datentransfer-Rate: 
50 Baud bis 921.6KBaud 
• 
Anschlüsse: 
32 x 9 Pin D-SUB Seriell Stecker mit Octopus-Kabel  
 
1 x 4Pin Stecker für den Anschluss des PC Netzteil 
• 
Hardwaresysteme:  
PCI Express Slot x1 bis x16 
• 
Treiber: 2000/XP(32&64)/Vista(32&64)/Win7(32&64)/ 
 CE(4.2&5.0)/Server(2003&2008)/Linux(2.4.x&2.6.x) 
• 
Betriebstemperatur : 
0
0
 bis 55
Celsius 
• 
Lagertemperatur: 
-40
0
 bis 75
Celsius 
• 
Rel. Luftfeuchtigkeit: 
5% bis 95% 
• 
Stromversorgung: 
3,3 Volt über PCI-Express Slot 
• 
Abmessung: 
182 x 104 mm  
• 
Gewicht: 2000g 
• 
Lieferumfang: 
EX-44032, 4 x Oktopus Kabel mit 8 x 9 Pin Stecker 
 
Treiber CD, Handbuch 
Description 
Features 
Specifications 
Anwendung / Application 
The EX-44032 PCI-Express I/O adapter provides 32 high performance 16C950-
type UART compatible RS-232 serial ports. It is designed for PC, thin client or 
server to provide instant COM port expansion via the PCI Express Bus (PCIe). 
The card is fully PCI Express Plug-and-Play compatible and there are no IRQ and 
I/O address configuration problems. The EX-44032 is supplied with four octopus 
cable. The EX-44032 don’t need external Expansion-Module. All ports will sup-
ported from the Octopus-Cable. 
• 
Interface: RS-232 V.24 
• 
FIFO Buffer: 16C950 with 128Byte 
• 
I/O addresses: Set from the operating system 
• 
Interrupt: Setting from the System BIOS with Interrupt Sharing 
• 
Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark 
• 
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND 
• 
PCI Express Interface: Fully compliant with 1.0a Specification  
• 
WHQL certified 
• 
Chip-Set:  Oxford 
OXPCIe958 
• 
Data transfer rate: 
50 Baud up to 921.6KBaud 
• 
Connectors: 
32 x 9 pin D-SUB serial connector with Octopus cable 
 
1 x 4Pin plug for power via the PC power supply  
• 
Hardware system:  
PCI Express Slot x1 up to x16 
• 
Driver: 2000/XP(32&64)/Vista(32&64)/Win7(32&64)/ 
 CE(4.2&5.0)/Server(2003&2008)/Linux(2.4.x&2.6.x) 
• 
Operating Temperature :  32
0
 up to 131
Fahrenheit 
• 
Storage Temperature:  -40
0
 up to 167
Fahrenheit 
• 
Rel. Humidity: 
5% to 95% 
• 
Current Supply: 
3.3 Volt via PCI-express slot 
• 
Size: 
182 x 104 mm  
• 
Weight: 2000g 
• 
Packaging contents: 
EX-44032, 4 x Octopus cable with 8 x 9 pin male,  
 
Driver CD, Manual 
EX-44032 
Server 
P.O.S 
Barcode 
Card reader 
Balance 
Terminal 
Display 
Modem 
EX-44032 
Work- 
station