Delphi Gateway Systems Analysis INterface Tool (SAINT) User Manual
SAINT
Keyword 2000 to RS-232 Gateway
01/20/04
Page 4 of 20
2
Overview
This document describes the operation of the Keyword 2000 to RS-232 Gateway. The gateway is often referred to
as the “SAINT gateway” or simply “SAINT”.
The following is synopsis of gateway features:
as the “SAINT gateway” or simply “SAINT”.
The following is synopsis of gateway features:
•
Allows host system to communicate on Keyword 2000 bus.
•
Performs timing, access, arbitration, serialization, and error control.
•
Configuration via host to gateway messages.
•
LED status indicator array:
1. Power LED (flashing LED)
2. Bus Message LED (toggles upon receiving a valid bus message)
3. Message Trigger LED (toggles upon receiving a specified byte pattern)
1. Power LED (flashing LED)
2. Bus Message LED (toggles upon receiving a valid bus message)
3. Message Trigger LED (toggles upon receiving a specified byte pattern)
•
Gateway to host status / error messages.
•
Software is easily updated via a flash connector. Will eventually be done through the USB bus.
The following is a synopsis of requirements for use of the gateway:
Connection to power, ground, and busses to be monitored
RS-232 connection to host