Emerson 20002158 User Manual
Optional mounting for CMF010 sensors
Figure 2-8:
A
B
C
A. Two user-supplied 5/16" (M8) bolts
B. Junction box or core processor (junction box shown)
C. Mounting surface
B. Junction box or core processor (junction box shown)
C. Mounting surface
2.
If necessary, install rigid standoffs between the sensor and the mounting surface.
3.
Using two user-supplied 5/16" (M8) bolts (minimum length 2 1/4" [58 mm]), secure
the sensor case to the mounting surface.
the sensor case to the mounting surface.
2.5
Mount a CMFS007, CMFS010 or CMFS015
sensor in a bracket
The CMFS007, CMFS010 and CMFS015 sensors have an optional mounting bracket for use
with small or flexible pipeline. If the pipeline adequately supports the sensor, this
procedure can be skipped.
1.
with small or flexible pipeline. If the pipeline adequately supports the sensor, this
procedure can be skipped.
1.
Secure the mounting bracket to a wall or other flat surface with four user-supplied
5/16" (8 mm) bolts.
5/16" (8 mm) bolts.
2.
Place the sensor into the bracket.
3.
Secure the sensor in the bracket with the supplied 5/16" (M8) U-bolts.
Mounting
Installation Manual
15