Emerson AV50 User Manual
38
Bass and Treble Adjustments
These adjustments can be made while a movie is
playing or while the disc is stopped.
playing or while the disc is stopped.
The default setting for the Bass and Treble level is 0dB.
To increase or decrease the Bass or Treble levels press
the Bass or Treble buttons on the remote control. The front
panel display will show Bass or Treble and “0 dB”. While
the Bass or Treble level appears on the front panel display
press the CH. LEVEL “+” or “-” buttons to adjust the levels
up or down as desired.
To increase or decrease the Bass or Treble levels press
the Bass or Treble buttons on the remote control. The front
panel display will show Bass or Treble and “0 dB”. While
the Bass or Treble level appears on the front panel display
press the CH. LEVEL “+” or “-” buttons to adjust the levels
up or down as desired.
Adjusting the Left/Right Balance
If your normal listening position is closer to one side
of your room rather than in the exact center, you can
compensate by adjusting the Balance control.
of your room rather than in the exact center, you can
compensate by adjusting the Balance control.
Press the CH LEVEL button on the remote control. The
balance setting will appear on the front panel display as
follows:
balance setting will appear on the front panel display as
follows:
The above display indicates an equal balance between
the left and right speakers. To shift the balance to the
right, press the “+” (R) button. To shift the balance to the
left, press the “-” (L) button. Note you must make the
adjustments while the balance setting appears on the
front panel display.
the left and right speakers. To shift the balance to the
right, press the “+” (R) button. To shift the balance to the
left, press the “-” (L) button. Note you must make the
adjustments while the balance setting appears on the
front panel display.