Edirol UA-20 User Manual
40
Getting Connected and Installing Drivers (Windows)
■
Volume Control setting
If you installed the standard Windows driver, set the
Windows volume control.
Windows volume control.
1
Open the
Volume Control
.
Click the Windows
Start
button, and select
Programs |
Accessories | Entertainment | Volume Control
.
2
Raise or lower the slider to adjust the volume of the
UA-20.
UA-20.
If you have installed the Standard driver, the UA-20 can use
the Windows
the Windows
volume control
to adjust the output volume.
Items that can be set
* 1 If the CD playback volume does not change when you adjust this
control, then change the WAVE volume. If you are using Windows
2000 and the
2000 and the
CD Player
is not displayed, check
“Enable digital
music CDs for this CD playback device”
in
Digital CD
Playback
.
CD Player
Controls the volume of “audio CDs” on the
internal CD-ROM drive of the computer. (*1)
internal CD-ROM drive of the computer. (*1)
WAVE
Controls the volume of sound output from
the “EDIROL UA-20” audio output device.
Digital output and analog output will
change.
the “EDIROL UA-20” audio output device.
Digital output and analog output will
change.
SW Synth
Controls the volume of the software synthe-
sizer built into Windows.
sizer built into Windows.
If the Volume Control is not
installed on your computer,
use the
installed on your computer,
use the
Control Panel
icon
Add or Remove Programs
to
install it. For details on
installation, refer to the
Windows manual or Help.
installation, refer to the
Windows manual or Help.
If Mute is checked or if the
slider is lowered all the way,
no sound will be output from
the UA-20.
slider is lowered all the way,
no sound will be output from
the UA-20.
You will be able to use the
UA-20 at the best audio quality
if you set the Volume Control
volume to the maximum
setting.
UA-20 at the best audio quality
if you set the Volume Control
volume to the maximum
setting.