Edirol UA-20 User Manual
44
Getting Connected and Installing Drivers (Macintosh)
■
Installing the UA-20 driver (OMS)
Use the following procedure to install the UA-20 driver.
The included
The included
UA-20 OMS driver
is an add-on module for
using the UA-20 with OMS. In order for you to use it,
OMS
must already be installed on the hard disk from which
you started up
you started up
.
If you would like to learn more about
OMS
, refer to
OMS_2.3_Mac.pdf
in the
OMS Driver
folder within the
Driver E
folder of the CD-ROM. You will need the Adobe
Acrobat Reader in order to view
OMS_2.3_Mac.pdf
.
* Disconnect the UA-20 from the Macintosh before you perform the
installation.
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to
exit this as well.
exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the
UA-20 OMS Driver-E Installer
icon
(found in the
Driver E–OMS Driver
folder of the
CD-ROM) to start up the installer.
4
Verify the
Install Location
, and click
[Install]
.
fig.03-scdrv2Z.e
5
If a message like
the following is
displayed, click
the following is
displayed, click
[Continue]
.
The other currently
running applications will exit, and installation will continue.
running applications will exit, and installation will continue.
6
A dialog box will indicate
Installation completed
.
Click
[Restart]
to restart your Macintosh.
OMS
can be found in the
OMS
Driver
folder within the
Driver
E
folder of the CD-ROM.
The indication for the
installation location will differ
depending on your system.
Make sure that the startup disk
for the system you are using is
selected.
installation location will differ
depending on your system.
Make sure that the startup disk
for the system you are using is
selected.