Panasonic BH-606 User Manual

To reset the headset if it stops 
functioning, even though it is charged, 
connect the headset to a charger that 
is connected to a wall outlet.

If you cannot connect the headset to 
your compatible phone, check that the 
headset is charged, switched on, and 
paired with the phone.

This device has an internal, nonremovable, 
rechargeable battery. Do not attempt to 
remove the battery from the device as you 
may damage the device. This device is 
intended for use when supplied with 
power from the following chargers: AC-3, 
AC-4, AC-5, and DC-4. The exact charger 
model number may vary depending on the 
type of plug. The plug variant is identified 
by one of the following: E, EB, X, AR, U, A, 
C, or UB. The battery can be charged and 
discharged hundreds of times, but it will 
eventually wear out. Recharge your 
battery only with Nokia approved chargers 
designated for this device. Use of an 
unapproved charger may present a risk of 
fire, explosion, leakage, or other hazard.

If a battery is being used for the first time 
or if the battery has not been used for a 
prolonged period, it may be necessary to 
connect the charger, then disconnect and 
reconnect it to begin charging the 
battery. If the battery is completely 
discharged, it may take several minutes 
before the charging indicator light is 
displayed.

Unplug the charger from the electrical 
plug and the device when not in use. 
Do not leave a fully charged battery 
connected to a charger, since 
overcharging may shorten its lifetime. 
If left unused, a fully charged battery 
will lose its charge over time.