Sony BDV-E6100 Owner's Manual

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-11(1)

D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\090SET.fm

masterpage: Left

x [Pause Mode] (BD/DVD VIDEO/
DVD-R/DVD-RW only)
[Auto]: The picture, including subjects that 
move dynamically, is output with no jitter. 
Normally select this position.
[Frame]: The picture, including subjects 
that do not move dynamically, is output in 
high resolution.

x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing 
the interactive audio and secondary audio 
to the primary audio.
[Off]: Outputs the primary audio only.

x [Audio DRC]
You can compress the dynamic range of the 
sound track.

[Auto]: Performs playback at the dynamic 
range specified by the disc (BD-ROM 
only).
[On]: The system reproduces the sound 
track with the kind of dynamic range that 
the recording engineer intended.
[Off]: No compression of dynamic range.

x [Attenuate - AUDIO]
Distortion may occur when you listen to an 
equipment connected to the AUDIO IN 
(L/R) jacks. You can prevent distortion by 
attenuating the input level on the unit.

[On]: Attenuates the input level. The output 
level will decrease at this setting.
[Off]: Normal input level.

x [Audio Output]
You can select the output method where the 
audio signal is output.

[Speaker]: Outputs multi-channel sound 
from the system’s speakers only.
[Speaker + HDMI]: Outputs multi-channel 
sound from the system’s speakers and 
2-channel linear PCM signals from the 
HDMI (OUT) jack.
[HDMI]: Outputs sound from the HDMI 
(OUT) jack only. Sound format depends on 
the connected equipment.

• When [Control for HDMI] is set to [On] 

(page 50), [Audio Output] is set to [Speaker + 
HDMI] automatically and this setting cannot be 
changed.

• When [Audio Output] is set to [HDMI], the 

output signal format for the “TV” function is 
2-channel linear PCM.

x [Sound Effect]
You can turn on or off the system’s sound 
effects (SOUND MODE setting 

(page 24))

. 

For a 2-channel source, you can select 
[Dolby Pro Logic], [DTS Neo:6 Cinema], 
or [DTS Neo:6 Music] to simulate surround 
sound.

[Sound Mode On]: Enables the surround 
effect of the sound mode 

and 

Football mode (page 25).
[Dolby Pro Logic]: The system simulates 
surround sound from 2-channel sources 
and outputs sound from all speakers 
(5.1 channel) (Dolby Pro Logic decoding).
[DTS Neo:6 Cinema]/[DTS Neo:6 Music]: 
The system simulates surround sound from 
2-channel sources and produces multi-
channel sound (DTS Neo:6 Cinema/DTS 
Neo:6 Music mode decoding).
[2ch Stereo]: This system outputs the sound 
from the front left/right speakers and 
subwoofer only. Multi-channel surround 
formats are downmixed to 2-channel.