Sony BDV-E2100 Owner's Manual

Page of 72
42
US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-11(1)
D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\080OTH.fm
masterpage: Left
7
Press RETURN.
The system returns to the previous 
display.
8
Press 
V/v to select [Test Tone], then 
press .
9
Press 
V/v to select [Off], then press 
.
The test tone signals are not output from the 
HDMI (OUT) jack.
To adjust the volume of all the speakers at one 
time, press VOL +/–.
Using the Sleep Timer
You can set the system to turn off at a 
preset time, so you can fall asleep listening 
to music. The time can be preset in intervals 
of 10 minutes.
Press SLEEP.
Each time you press SLEEP, the minutes 
display (the remaining time) in the front 
panel display changes by 10 minutes.
When you set the sleep timer, the 
remaining time appears every 5 minutes.
When the remaining time is less than 
2 minutes, “SLEEP” flashes in the front 
panel display.
To check the remaining 
time
Press SLEEP once.
To change the remaining 
time
Press SLEEP repeatedly.
Deactivating the 
Buttons on the Unit
(Child Lock)
You can deactivate the buttons on the unit 
(except for "/1) for preventing 
misoperation, such as child mischief.
Hold down x on the unit for more 
than 5 seconds.
“LOCKED” appears in the front panel 
display.
The child lock function is activated and the 
buttons on the unit are locked. (You can 
operate the system by using the remote 
control.)
To cancel, hold down x for more than 
5 seconds until “UNLOCK” appears in the 
front panel display.
If you operate the buttons on the unit while the 
child lock function is on, “LOCKED” flashes in 
the front panel display.
Controlling Your TV 
with the Supplied 
Remote Control
By adjusting the remote control signal, you 
can control your TV with the supplied 
remote control.
When you replace the batteries of the remote 
control, the code number may reset to the default 
(SONY) setting. Set the appropriate code number 
again.
Note
Tip
Note
Note