Jabra 6430 User Manual

23

Jabra GO 6430 User manUal

Attaching a Head- or Neckband
to attach a head- or neckband:

1.  remove the current wearing-style attachment, if any.

2.  align the earbud and fitting of the headset with the matching holes on the head- or neckband and press until 

it clicks into place.

3.  put on the headset and rotate the microphone until it is as close as possible to your mouth.

Removing a Wearing-Style Attachment
to remove a wearing-style attachment, perform the opposite procedure to that described above for attaching it.

RePlacinG the eaRbud

7.3 

after extensive use, the earbud of the Jabra GO headset may become worn, dirty and/or uncomfortable. the 

headset includes two extra, differently-shaped earbuds. Otherwise, you can order additional replacements from 

Gn at any time.
to remove the earbud, hold the headset with the earbud facing you and twist the earbud gently anti-clockwise 

until it comes free. then align the replacement earbud onto the same fitting and gently press it down until it 

clicks into place (do not rotate).

uSinG the headSet with otheR bluetooth deviceS

7.4 

Pairing the Headset with a Mobile Phone
the Jabra GO headset is based on bluetooth and can therefore be used with any mobile phone that also supports 

bluetooth. you must set up the wireless communication between the two devices by pairing them. see Section 

4.3: Pairing the Headset with your Mobile Phone for complete instructions.
Pairing the Headset with a Jabra LINK 350 USB Bluetooth Adapter
to pair the headset to a Jabra lInK 350 Usb bluetooth adapter connected to your computer, place both units 

in pairing mode while they are close to each other. they will find each other automatically and then pair and 

connect to each other as needed. see Section 9.3: Pairing the Jabra LINK 350 USB Bluetooth Adapter and Headset for 

complete details.
Managing Your Bluetooth Connections and Pairing Table
Once you have paired it with your mobile phone and Jabra lInK 350 Usb bluetooth adapter, the headset 

manages its bluetooth connections automatically. however, you may sometimes need to manage your bluetooth 

connections and pairing table more carefully. see Section 7.12: Managing Bluetooth Connections and the Pairing 

Table for complete details.