GE DHDVH66 User Guide

A. Carefully lay the dryer on its side.

Use the packing material so you
don’t scratch the finish on the
dryer.

B. Use an open-end wrench or pliers

to remove the dryer leveling legs.

Back out and remove 
all 4 leveling legs

Locate the 4 rubber pads in the 
parts package. Remove the adhesive
backing and firmly place over on the
bracket where you removed the
leveling legs.

A. Align the holes in the left bracket

with the holes in the bottom left
corner of the dryer. Use a Phillips
screwdriver to install the 2 #12 x 1

″

tapping screws.

B. Repeat the above step with the

right bracket on the bottom right
corner of the dryer.

C. Set the dryer upright.

NOTE: Make sure to set the dryer 
on a piece of packing material so 
the brackets that are attached to the
bottom of the dryer do not damage
the floor.

21