Clarion MAX685BT User Manual

MAX685BT

English

Owner

’s ma

nua

4. BASIC OPERATIONS

Note:
• Be sure to read this chapter referring to the chapter “3. CONTROLS” (page 8).

Turning On and Off the Power

CAUTION

CAUTION

When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.

Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long time

without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.

1. Start the engine. The power is supplied to this

unit.

2. Press the [SRC] button. The unit

automatically memorizes its last operation
mode and will automatically switch to display
that mode.

3. To turn off the power, press and hold the

[SRC] button for more than 1 second.

Adjusting the Volume

1. Press the [–]/[+] buttons to adjust the volume.

[–]: Decreases the volume.
[+]: Increases the volume.
• The volume level indicated in the display is

in a range from 0 (min.) to 33 (max.).

CAUTION

CAUTION

While driving, keep the volume level at which
external sounds can be heard.

Opening the operation panel and adjusting the angle

Open the operation panel when inserting/ejecting
a disc.
The angle of the operation panel can be adjusted
depending on the mounting angle of the unit or
light coming into the car.

CAUTION

CAUTION

• Do not move the operation panel forcibly or

do not apply strong force to the operation
panel.

• When the operation panel is operating, be

careful not to get your hand or finger caught
between the operation panel and main unit
or its mechanical parts.

• The driver should not operate the operation

panel while driving.

Opening/closing the operation panel

1. Press the [

7] (OPEN/CLOSE) button.

The operation panel will be opened or closed.

Note:
• The operation panel will close automatically when

leaving it open for a while.

• When the operation panel is open, the touch panel

cannot be operated.

Engine ON
position