Clarion MAX685BT User Manual

MAX685BT

When you download a DivX VOD (Video-on-
Demand) file from a web site, entering the 
registration code of your playback system may 
be required to authorize the file. You can confirm 
the registration code of your system and the URL 
information by the following operation.

Note:
• The DivX registration code is not displayed when a 

You can perform the system check by the 
following operation.

The audio output can be attenuated when a voice 
interrupt of the navigation system arises.
• The factory default setting is “Low”.

Note:
• This setting is enabled only when the Navigation 

You can change the wall paper (background 
image on the most screens) by selecting it from 
the Wall Paper tab screen.

• The time is displayed in 12-hour format.

Note:
• This setting is disabled when the Navigation 

“CATS” is the acronym of “Clarion Anti-Theft 
System”.
When you set a PIN code (called as “Personal
Code”), a theft is prevented by disabling the 
operation of the unit at the theft.
In addition, set the Blink LED function to improve 
the effect of the CATS function (see page 61).

3-1. Touch the [System] key to display the 

System tab screen.

3-2. Confirm the displayed information of the DivX 

Registration Code and DivX URL items.

3-1. Touch the [System] key to display the 

System tab screen.

3-2. Touch the [

C] key to display the next screen.

3-3. Touch the [Check] key of the System Check 

item.
A confirmation screen is displayed.

3-4. Touch the [Yes] key to perform the system 

check manually.
The system will be restarted after 
performing the system check.

3-1. Touch the [System] key to display the 

System tab screen.

3-2. Touch the [

C] key to display the next screen.

3-3. Touch the [High], [Mid], [Low], or [Mute]

key of the Audio ATT item to set the volume 
level when a voice interrupt arises.

3-1. Touch the [Wall Paper] key to display the 

Wall Paper tab screen.

3-2. Touch the desired Wall Paper key you wish 

to set.
The background image of the screen will be 
changed to the selected image.

3-1. Touch the [Clock] key to display the Clock 

tab screen.

3-2. Touch the [

{] , [}] , [am] , and [pm] keys 

under the hour, minute, and am/pm box to 
adjust the time, then touch the [Set] key 
(The factory default setting is “1:00 am”).

3-1. Keep pressing the [MENU] button more than 

2 seconds.
The Set Code screen appears.
• When a Personal Code is already set, the 

Erase Code screen will appear. Retry this 
operation after erasing the old Personal 
Code.

3-2. Enter your desired 4-digit Personal Code by 

touching the [0] to [9] keys, then touch the 
[ENT] key.
• Touch the [CLR] key when you make a 

mistake in entering.