Clarion DXZ445 User Manual

DXZ445

For enhanced FM performance the

®

tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.

1. Press the [FNC] button and select the radio

mode. The frequency appears in the display.

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the
radio reception band changes in the following
order:

FM1

➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [

a] or [d] button to tune in the

desired station.

There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.

1. Press the [BND] button and select the

desired band (FM or AM).

› If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.
“MANU”  in the display goes off and seek
tuning is now available.

2. Press the [

a] or [d] button to automatically

seek a station.

When the [

d] button is pressed, the station

is sought in the direction of higher
frequencies; if the [

a] button is pressed, the

station is sought in the direction of lower
frequencies.

There are 2 ways available: Quick tuning and
step tuning.

When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.

3. Press the [

a] or [d] button to select

“T<F 10>”.

Turning the [ROTARY] knob clockwise or
counterclockwise to select the frequency.

› The factory default setting is “T<F 10>”.

(Adjustment 10 kHz/15 kHz)

4. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

1. Press the [A-M] button and select “BAL 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left speaker.

› The factory default setting is “BAL 0”.

(Adjustment range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

1. Press the [A-M] button and select “FAD 0”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.

› The factory default setting is “FAD 0”.

(Adjustment range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

The MAGNA BASS EXTEND does not adjust the
low sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.

› The factory default setting is off.

1. Press and hold the [A-M] button for 1

second or longer to turn on the MAGNA
BASS EXTEND effect. “M-B EX” lights in
the display.

2. Press and hold the [A-M] button for 1 second

or longer to turn off the MAGNA BASS
EXTEND effect. “M-B EX” goes off from the
display.