Hyundai H-CDM8022 User Manual
12
- FADER
control
Display shows the FADER level.
Press and hold the VOL/SEL knob for more then 2 seconds to enter the menu and select the mode. Each of the
following modes is adjustable by rotating the VOL/SEL knob.
TA seek mode: choose TA ALARM or TA SEEK mode.
• TA ALARM mode: alarm is turned on.
• TA SEEK mode: TA SEEK is automatically activated.
MASK mode: choose Mask DPI or Mask ALL.
• MASK DPI mode: Only AF which have different program identification is masked.
• MASK ALL mode: The AF which has different program identification and NO RDS signal with high field
strength is masked.
TA VOL mode: adjust the value within 0 – 46.
RETUNE mode: select Retune L or Retune S.
• RETUNE L mode: long; TA seek interval is 180 seconds.
• RETUNE S mode: short; TA seek interval is 45 seconds.
Note: Retune mode is active for TA SEEK mode only.
DSP mode: choose DSP sound effect: ROCK, POP, CLASSIC, FLAT, DSP OFF.
LOUD mode: switch the loud to ON or OFF.
12/24 hours mode: choose the 12 or 24 hours mode.
VOL LAST: switch to VOL ADJ.
• VOL LAST mode: the turn-on volume level is that of latest power-off.
• VOL ADJ mode: volume level is adjustable.
V-ADJ mode: adjust within 0 – 46.
BEEP mode: switch the beep sound to ON or OFF.
CONNT mode: choose CONNT A or CONNT M.
RETUNE mode: select Retune L or Retune S.
• RETUNE L mode: long; TA seek interval is 180 seconds.
• RETUNE S mode: short; TA seek interval is 45 seconds.
Note: Retune mode is active for TA SEEK mode only.
DSP mode: choose DSP sound effect: ROCK, POP, CLASSIC, FLAT, DSP OFF.
LOUD mode: switch the loud to ON or OFF.
12/24 hours mode: choose the 12 or 24 hours mode.
VOL LAST: switch to VOL ADJ.
• VOL LAST mode: the turn-on volume level is that of latest power-off.
• VOL ADJ mode: volume level is adjustable.
V-ADJ mode: adjust within 0 – 46.
BEEP mode: switch the beep sound to ON or OFF.
CONNT mode: choose CONNT A or CONNT M.