JVC KD-SX950 User Manual

28

You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• ON:

Activates the key-touch tone.

• OFF: Deactivates the key-touch tone.

1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears

on the display.

2. Select “BEEP” with 

 

¢

 or 

4

.

3. Select the desired mode with the control dial.

The key-touch tone alternates between on and off.

You can select the scroll mode for the name display and disc information if it consists of more
than 8 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”
• ONCE: Scrolls only once
• AUTO: Repeats the scroll (5-second intervals in between)
• OFF:

Cancels Auto Scroll

1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears

on the display.

2. Select “SCROLL” with 

 

¢

 or 

4

.

3. Select the desired mode with the control dial.

The scroll mode changes as follows:

When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for
your subwoofer. When shipped from the factory, the subwoofer cutoff frequency is set to
“MID.”
• MID:

Frequencies higher than 80 Hz are cut off to the subwoofer.

• HIGH:

Frequencies higher than 120 Hz are cut off to the subwoofer.

• LOW:

Frequencies higher than 50 Hz are cut off to the subwoofer.

1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears

on the display.

2. Select “CUTOFF F” with 

 

¢

 or 

4

.

3. Select the desired mode with the control dial.

The subwoofer cutoff frequency changes as follows:

EN21-29.KD-SX950[J]/F

99.12.13, 1:15 PM

28