Hyundai H-CDM8031 User Manual

Page of 48
 
21
Note: 
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton 
swab soaked in isopropyl alcohol to clean the socket on the back of the control panel. 
 
Handling discs 
•  Dirty, scratched or warped discs may cause skip ping or noise. 
•  Handle the disc only by the edges. To keep clean do not touch its surface. 
•  Discs should be stored in their cases after use to avoid scratches. 
•  Do not expose discs to direct sunlight, high humidity, high temperature or dust.   
•  Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during 
summertime). 
•  Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some 
felt-tip pens, may damage its surface. 
•  DO NOT touch the unlabeled side. DO NOT attach any seal, label or data protection sheet to either side of a 
disc. 
Cleaning  
Cleaning the cabinet 
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy 
water, and then wipe clean. 
Cleaning discs
 
Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, 
compact discs have no grooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth 
should remove must panicles. Wipe in a straight motion from the center to the edge. 
Never use thinner benzine, record cleaner or anti static spray on a compact   
disc. Such chemicals can damage its plastic surface.