JVC 0708DTSMDTJEIN User Manual

Page of 60
1– EN
  ENGLISH
[European Union only]
IMPORTANT FOR LASER PRODUCTS
1.  CLASS 1 LASER PRODUCT
2.  CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified 
service personnel.
3.  CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
4.  REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
KD-R207
CD RECEIVER: INSTRUCTIONS/INSTALLATION
0808DTSMDTJEIN
EN
© 2008 Victor Company of Japan, Limited
Warning
If you need to operate the unit while driving, be sure to 
look around carefully or you may be involved in a traffic 
accident.
Caution on volume setting
Discs produce very little noise compared with other sources. 
Lower the volume before playing a disc to avoid damaging 
the speakers by the sudden increase of the output level.
For safety...
•  Do not raise the volume level too much, as this will block 
outside sounds, making driving dangerous.
•  Stop the car before performing any complicated 
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold 
weather, wait until the temperature in the car becomes 
normal before operating the unit.
Detaching the control panel
Attaching the control panel
How to reset your unit
Reset the unit after installation is complete.
•  Your preset adjustments will also be erased.
How to forcibly eject a disc
•  Be careful not to drop the disc when it ejects.
•  If this does not work, reset your unit.
PREPARATIONS
Finish
Enter PSM menu.
Select an item.
Adjust.
Basic settings
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best 
possible performance from the unit.
Installation/connection are explained at the last section of this manual (reverse page, indicated with 
 symbol).
To keep discs clean
Wipe in a straight line from center of disc to 
edge. Do not use liquid cleaners, thinners, or 
benzene.
To play new discs
Remove any rough areas from the inner and 
outer edges of the disc.
MAINTENANCE
How to clean the connectors
Wipe the connectors with 
a cotton swab or cloth 
moistened with alcohol.
Moisture condensation
Moisture may condense on the lens inside the unit. Eject 
the disc and leave the unit turned on for a few hours until 
the moisture has evaporated.
Do not use the following discs:
Connectors
MORE ABOUT THIS UNIT
1
  Canceling the display demonstrations
 
Select “DEMO,” then “DEMO OFF.”
2
  Setting the clock
 
Select “CLOCK H” (hour), then adjust the hour.
 
Select “CLOCK M” (minute), then adjust the 
minute.
 
Select “24H/12H,” then “24H” (hour) or 
“12H” (hour).
Available characters on the display
   Available characters        
   Display indications
Warped disc
Sticker and sticker residue
Stick-on label
Unusual shape
Single CD (8 cm disc)
C-thru Disc (semi-
transparent disc)
Transparent or semi-transparent 
parts on its recording area
GET0591-001A
[EE]
  – The files on the CD-R/CD-RW are written using the 
“Packet Write” method.
  – There are improper recording conditions (missing data, 
etc.) or media conditions (stained, scratched, warped, 
etc.).
•  CD-RWs may require a longer readout time since the 
reflectance of CD-RWs is lower than that of regular CDs.
Playing an MP3/WMA disc 
•  This unit can play back MP3/WMA files with the 
extension code <.mp3> or <.wma> (regardless of the 
letter case—upper/lower).
•  This unit can show the names of albums, artists 
(performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for 
MP3 files and for WMA files
•  This unit can play back MP3/WMA files meeting the 
conditions below:
  – Bit rate: 8 kbps — 320 kbps
  – Sampling frequency: 
    48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
    24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
  – Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, 
Windows long file name
•  The maximum number of characters for file/folder names 
vary depending on the disc format used (includes 4 
extension characters—<.mp3> or <.wma>).
  – ISO 9660 Level 1: up to 12 characters; ISO 9660 Level 
2: up to 31 characters; Romeo: up to 128 characters; 
Joliet: up to 64 characters; Windows long file name: up 
to 128 characters
•  This unit can recognize a total of 512 files, 255 folders, 
and 8 hierarchical levels.
•  This unit can play back files recorded in VBR (variable bit 
rate).
  Files recorded in VBR have a discrepancy in the elapsed 
time display, and do not show the actual elapsed time. 
In particular, this difference becomes noticeable after 
performing the search function.
•  This unit cannot play back the following files:
  – MP3 files encoded in: MP3i and MP3 PRO format, in an 
inappropriate format, layer 1/2.
  – WMA files: encoded in lossless, professional, and voice 
format; not based upon Windows Media® Audio; copy-
protected with DRM.
  – Files which have data such as AIFF, ATRAC3, etc.
•  The search function works but search speed is not 
constant.
  Basic operations 
•  By pressing SRC on the unit, you can also turn on the 
power. If the source is ready, playback also starts.
•  If you turn off the power while listening to a track, 
playback will start from where it had been stopped 
previously next time you turn on the power.
  Tuner operations
•  During SSM search...
  – All previously stored stations are erased and the 
stations are stored anew.
  – When SSM is over, the station stored in the lowest 
preset number will be automatically tuned in.
•  Network-Tracking Reception requires two types of Radio 
Data System signals—PI (Programme Identification) 
and AF (Alternative Frequency) to work correctly.
•  If a Traffic Announcement is received by TA Standby 
Reception, the volume level automatically changes to the 
preset level (TA VOL) if the current level is lower than the 
preset level.
•  When Alternative Frequency Reception is activated 
(with AF selected), Network-Tracking Reception is also 
activated automatically. On the other hand, Network-
Tracking Reception cannot be deactivated without 
deactivating Alternative Frequency Reception.
  Disc operations
Caution for DualDisc playback
•  The Non-DVD side of a “DualDisc” does not comply with 
the “Compact Disc Digital Audio” standard. Therefore, 
the use of Non-DVD side of a DualDisc on this product 
may not be recommended.
General
•  This unit has been designed to reproduce CDs/CD Texts, 
and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD 
(CD-DA) and MP3/WMA formats.
Playing a CD-R or CD-RW
•  Use only “finalized” CD-Rs or CD-RWs.
•  This unit can play back multi-session discs; however, 
unclosed sessions will be skipped while playing.
•  Some CD-Rs or CD-RWs may not be played back on this 
unit:
  – Discs are dirty or scratched.
  – Moisture condensation has occurred on the lens inside 
the unit.
  – The pickup lens inside the unit is dirty.
EN_KD-R207[EE]_f.indd   1
EN_KD-R207[EE]_f.indd   1
29/8/08   4:04:09 PM
29/8/08   4:04:09 PM